CS-d
4Pages

Unique e ual Furnac D gy Technolo Reliable Carbon & Sulfur Measurement for Any Type of Sample The new ELTRA ELEMENTRAC CS-d is a reliable, precise and robust combustion analyzer designed for the measurement of carbon and sulfur concentrations. The element-selective IR detectors provide a wide measuring range from the lower ppm range up to 100 % for both elements. Due to the unique combination of two different combustion techniques in one analyzer, the ELEMENTRAC CS-d ensures reliable C/S measurement in both organic and inorganic sample materials. Typical sample materials for the ELEMENTRAC CS-d: Steel, iron, cast iron, copper, ceramics, soil, fuel, oil, coal, coke

Technical Details ELEMENTRAC® CS-d Induction Furnace Unique ce Dual Furna y Technolog Resistance Furnace ELTRA’s advanced analyzer technology Benefits n Unique combination of induction & resistance furnace n Massive gold IR path n Wide working range from 2 ppm up to 100 % C/S The ELEMENTRAC CS-d is equipped with a resistance furnace for combustion of organic and an induction furnace for combustion of inorganic sample materials. For reliable carbon and sulfur analysis both furnaces can be used independently, without the need for hardware adjustments. The common detection and measuring unit...

Solutions for best carbon and sulfur recovery To ensure the measured sulfur and carbon concentrations are not too low, the ELEMENTRAC CS-d uses an electrical heated dust trap and an enlarged temperature-controlled catalyst furnace. The dust trap significantly reduces condensations and forming of sulfuric acid whereas the catalyst furnace guarantees effective oxidation of traces from carbon monoxide. The catalyst furnace can also be used in the “resistance furnace mode” where carbon monoxide can be produced in larger amounts when a lower combustion temperature is applied. Induction furnace n...

350 mg resistance furnace | 500 mg (1000 mg) induction furnace C: 0.0002 - 12 % | 0.004 - 62,8 % S: 0.0002 - 6 % | 0.0006 - 31,4 % General Data Analysis time (nominal) Calibration Detection Typical samples Reagents Power supply Required gasses (2-4 bar) 1 other configurations on request 45 Seconds (induction furnace) 90 Seconds (resistance furnace) Solid (Liquid2) CRMS Up to 4 IR cells; with gold path3 Steel, iron, cast iron, ceramics, copper (induction furnace) Coal, coke, plants, soil, oil (resistance furnace) - Sodium hydroxide - Magnesium perchlorate - Pt/Si catalyst (Cu(II)O as...