- Catalogs
- emeritalia srl
- digital line
digital line
digital line
- Weight: 13 kg
- Dimensions: 250 x 500 x 370 mm
- Noise Level: Less than 59 dB(A)
- CAM Interface: RJ45
- Filter Cleaning: Automatic
- Output Filter Quality: E12
- Primer Filter Quality: M Class
- Filter Technology: M Class bag, EMC
- Operating Mode: Brushless or Brush
- Engine Technology: Brushless or Brush
- Depression: 2,000 mm/H2O or 2,100 mm/H2O
- Flow Rate: 41 L/S or 45 L/S
- Power: 800 Watt or 900 Watt
- Voltage: 220/240 Volt
The interface cables are used to connect the vacuum to the CAM unit, ensuring seamless communication for automatic start and stop management. The LABÒ CAM is available with a brushless motor for demanding tasks.
The LABÒ CAM vacuums are designed to remove dust from milling machines effectively. The filtering system is highly efficient in picking up dust, which is crucial for maintaining the CAM unit's performance, especially when dealing with large quantities of milling and fine powders.
- Roland: 1+/2 GND, 6+/5 GND
- Sirona: 2+/11 GND, 6+/5 GND
- VHF - 6 pin: 1+/6 GND, 6+/5 GND
- VHF - 4 pin: 3+/4 GND, 6+/5 GND
- AG: 4+/3 GND, 6+/5 GND
- Imes Core: 6+/5 GND
Catalog excerpts
Dust collectors for CAD/CAM milling machines Linea Digitale Large quantities of milling and fine powders put quickly your CAM unit in critical condition: they must be removed quickly and effectively. LABÒ CAM vacuums remove dust from milling machine and the highly effective filtering system reliably picks it up. Voltage Volt Power Watt Engine technology Operating mode Filter technology Primer filter quality Output filter quality Filter cleaning INTERFACE CABLES Connecting the vacuum to the CAM unit. The interface connection ensures that the CAM unit and the vacuum device communicate perfectly to automatically manage start and stop. For the toughest jobs, the LABÒ CAM is also available with brushless motor. Milling brand Imes Core Extraction system
Open the catalog to page 1