FX 3000MD modular patient monitor

Product catalog summary

Overview: The FX 3000MD is a high-quality modular patient monitor designed for use in various hospital settings, including intensive care units, cardiology, and operating rooms. It offers high accuracy and reliability in measurements and features a modular design for flexible configuration of monitored parameters.

Display Options: The monitor is available with 15", 17", or 19" displays, allowing customization based on room size and user requirements. The touch screen and intuitive software facilitate quick user adaptation.

Temperature Module: Measures temperature from 0 to 50.0 °C with a resolution of 0.1 °C, supporting 1 or 2 channels.

CO2 Module: Measures CO2 from 0 to 100 mmHg and respiration rate from 0 to 100 rpm, with apnea recognition time between 5 to 60 seconds.

Multi Gas Module: Monitors gases including CO2, N2O, O2, and various anesthetic agents like Halothane and Isoflurane.

Central Station Cooperation: Features a color display for monitoring 1 to 32 patients, with options for full, selective, or single patient views. Data archiving and real-time transmission are supported via Ethernet.

Additional Options: Includes modules for cardiac output, intracranial pressure, 12-lead ECG, telemetry, and more. Advanced features include arrhythmia analysis, drug calculator, and hemodynamic calculations.

General Parameters: The monitor operates on 100 - 240 VAC or 12 VDC, with safety compliance to MDD and EN standards. It includes medical alerts for all parameters.

ECG Module: Supports multiple leads with a heart rate range of 15 - 300 bpm, and features for defibrillation protection and pacemaker detection.

Respiration Module: Measures respiration rate from 0 to 150 rpm using rheographic methods, with apnea recognition and waveform display.

NIBP Module: Offers manual, auto, or STAT measurement modes with safety limits for overpressure.

SpO2 Module: Utilizes Nellcor OxiMax™ technology for saturation measurement, with acoustic signaling and plethysmographic wave display.

IBP Module: Measures pressure from -50 to +320 mmHg with high accuracy and multiple channel support.

Technical Parameters: The document notes that Emtel reserves the right to make changes to the product specifications without notice.

Catalog excerpts

MODULAR PATIENT MONITOR PtfibnllOuhors Po^Htrvi- Ploni-hofS High quality modular patient monitor designed to be used in all hospital wards. FX 3000MD is mainly intended for intensive care units, cardiology, as well as for operating rooms, where the highest accuracy and reliability of measurements are required. Its modular design enables the flexible configuration of monitored parameters, due to the use of easily transferable modules. The monitor display can be selected depending on the size of the room in which it will be installed and user requirements. There are three options available: 15", 17" or 19". Due to the high quality touch screen and advanced software with an intuitive interface, a user is able to gain confidence in operating patient monitors in a very short time. EUROPEAN PRODUCT SOLD AROUND THE WORLD

Open the catalog to page 1

C€ 2274 TECHNICAL PARAMETERS GENERAL PARAMETERS TEMPERATURE MODULE Power supply Internal battery Protection class Safety requirements LCD DISPLAY Colour display Number of channels Sweep speed Trends Medical alerts for all parameters ECG MODULE Leads CMRR ratio Sensitivity Heart rate range QRS complex detection Protection against: - defibrillation impulse - high frequency disturbance Pacemaker detection and signaling Measurement range Resolution Number of channels CO2 MODULE_ Measurement range Respiration rate Apnea recognition time CO2 waveform displayed MULTI GAS MODULE CO2 N2O O2 Halothane Isoflurane Enflurane Sevoflurane Desflurane...

Open the catalog to page 2

FX 3000MD modular patient monitor

FX 3000MD modular patient monitor

Catalog excerpts

All EMTEL Śliwa sp.k. catalogs and technical brochures