*mymedicalexpo

Catalogs
EMUGE-Werk Richard Glimpel
BasicDrill Solid Carbide Twist Drills

BasicDrill Solid Carbide Twist Drills

Product catalog summary

Overview
The document details the BasicDrill series of solid carbide twist drills, emphasizing their universal application across various materials, particularly steel. Manufactured in Germany, these drills are designed for optimal performance and versatility.

Main Features

Diameter Range: 1.00 to 24.50 mm.
Material Compatibility: Suitable for steel, stainless steel, cast materials, and non-ferrous materials.
Design: Four margins for optimal guidance and prevention of jamming, especially in stainless steel.
Cutting Material and Coating: Combines carbide with a high-performance coating for enhanced cutting speeds and feed rates.
Cutting Edge and Point Geometry: Concave main cutting edge and optimized point design for efficient chip forming and coolant distribution.

Performance Classes
The drills are categorized into performance classes to assist in tool selection based on performance needs and batch size:

General Performance: For standard requirements and versatile use.
High Performance: For special materials or applications.
Superb Performance: For the highest performance values and technology.

Product Variants

BasicDrill Micro BD108-6xD: Designed for dimensions smaller than 3 mm, featuring internal cooling channels and high-performance coating.
BasicDrill-BD101-3xD: A 3xD solid carbide twist drill for universal application, with similar features to the Micro variant.

Technical Specifications
Includes detailed tables listing various drill sizes, their specifications, and recommended coolant-lubricant pressures for optimal performance.

Additional Resources
A QR code provides direct access to the web store for comprehensive tool information and cutting data. Registration offers additional product data and functionalities.

Specifications
The document categorizes materials into groups such as steel, stainless steel, cast materials, non-ferrous materials, and special materials, with subdivisions based on material properties like tensile strength.

Procedures
Outlines recommended cutting speeds (vc) and feed per revolution (f) for different materials and drill sizes, presented as minimum, recommended, and maximum values for adjustments based on specific work conditions.

Lubrication Recommendations
Suggests various lubrication methods, including emulsion, oil, minimum quantity lubrication (MQL), and dry/pressurized air, depending on the material being drilled.

Material Categories and Examples

Steel Materials: Includes cold-extrusion steels, construction steels, and high-alloyed steels with tensile strengths ranging from ≤600 N/mm² to ≤1400 N/mm².
Stainless Steel Materials: Covers ferritic, martensitic, austenitic, and duplex stainless steels with tensile strengths up to ≤1250 N/mm².
Cast Materials: Details cast iron types with lamellar, nodular, and vermicular graphite, as well as malleable cast iron.
Non-Ferrous Materials: Discusses aluminum and copper alloys, magnesium alloys, and synthetics, focusing on their tensile strengths and applications.
Special Materials: Includes titanium alloys, nickel alloys, cobalt alloys, and hard materials like high-strength steels and hardened steels.

Application Recommendations
Emphasizes adjusting cutting values based on individual work conditions such as material type, lubrication, and machine capabilities.

Contact Information
Provides contact details for EMUGE-Werk Richard Glimpel GmbH & Co. KG and FRANKEN GmbH & Co. KG, including addresses, phone numbers, and email for further inquiries.

Catalog excerpts

MUC Solid Carbide Twist Drills

Open the catalog to page 1

Twist Drills Main area of application The twist drill BasicDrill is universally applicable and available in the diameter range from 1.00 to 24.50 mm. The application area of the BasicDrill covers the material groups steel materials, stainless steel materials, cast materials and non-ferrous materials. Its application focus is the steel area. Cutting edge shape and edge preparation Cutting material and coating The concave main cutting edge combined with an optimised edge preparation enables the best cutting behaviour in the steel and cast iron area with excellent tool life. The combination of carbide...

Open the catalog to page 2

Twist Drills BasicDrill The EMUGE-FRANKEN performance classes of twist drills The performance classes indicated by stars make it easier to find the right tool for the specific performance requirements and the batch size to be produced. Tools for standard requirements and versatile use are assigned to the category “General Performance”. Tools designed for special materials or applications are marked “High Performance”. Specialists with the highest performance values and the best possible technology are classified as “Superb Performance”. Superb Performance High Performance Performance Batch size...

Open the catalog to page 3

Twist Drills Solid carbide twist drill for dimensions smaller than 3 mm, 6xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. Information about this product is also available on the web Taps Cold-forming taps

Open the catalog to page 4

BasicDrill £MUCI Taps Cold-forming taps Recommended coolant-lubricant pressure for BasicDrill Micro Coolant-lubricant pressure [bar] Drill diameter

Open the catalog to page 5

Twist Drills BasicDrill 3xD Applications - material Solid carbide twist drill, 3xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. Information about this product is also available on the web

Open the catalog to page 6

BasicDrill £MUCI Cold-forming taps

Open the catalog to page 7

Twist Drills BasicDrill Taps

Open the catalog to page 8

Twist Drills BasicDrill Applications - material Solid carbide twist drill, 5xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. DIN 6537 - Long design Information about this product is also available on the web Cold-forming taps

Open the catalog to page 9

BasicDrill Solid Carbide Twist Drills-10

Twist Drills BasicDrill Taps

Open the catalog to page 10

BasicDrill Solid Carbide Twist Drills-12

Twist Drills BasicDrill 8xD Applications - material Solid carbide twist drill, 8xD, in Basic geometry for universal application. Product features and benefits: Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. Extra long design Information about this product is also available on the web

Open the catalog to page 12

BasicDrill Solid Carbide Twist Drills-13

BasicDrill £MUCI Taps Cold-forming taps

Open the catalog to page 13

BasicDrill Solid Carbide Twist Drills-14

Chamfer Drills BasicDrill BasicDrill CM C-Quickline Applications - material Solid carbide chamfer drill, in Basic geometry for universal application. Four margins for better guidance and hole quality. Internal cooling channels and high-performance coating for high process reliability. Use in various materials with steel as the main application area. In order to obtain a complete configuration of the desired chamfer drill, the characteristics 1 - 5 must be defined in the respective specified area. 0 d-| Is a Corner protection Shank design l-| I2 0 d2 Not a stock tool, minimum order quantity =...

Open the catalog to page 14

BasicDrill Solid Carbide Twist Drills-15

Chamfer Drills Regrinding and recoating service Regrinding and recoating form an essential contribution to the economically efficient use of drilling tools. The EMUGE regrinding and recoating service guarantees the restoration of the original geometry and the original coating of the tool. If you are interested, please contact us.

Open the catalog to page 15

BasicDrill Solid Carbide Twist Drills-16

Twist Drills Application recommendation and cutting data Please note:

Open the catalog to page 16

BasicDrill Solid Carbide Twist Drills-17

Twist Drills BasicDrill Twist Drills BasicDrill

Open the catalog to page 17

BasicDrill Solid Carbide Twist Drills-18

Twist Drills and Chamfer Drills Application recommendation and cutting data Please note:

Open the catalog to page 18

BasicDrill Solid Carbide Twist Drills-19

Twist Drills and Chamfer Drills BasicDrill

Open the catalog to page 19

BasicDrill Solid Carbide Twist Drills-20

EMUGE-FRANKEN sales partners, please see www.emuge-franken.com/sales EMUGE-Werk Richard Glimpel GmbH & Co. KG Fabrik für Präzisionswerkzeuge Nürnberger Straße 96-100 91207 Lauf GERMANY +49 9123 186-0 +49 9123 14313 [email protected]

Open the catalog to page 20

BasicDrill Solid Carbide Twist Drills

BasicDrill Solid Carbide Twist Drills

Catalog excerpts

All EMUGE-Werk Richard Glimpel catalogs and technical brochures