WIRE / STRAND SECTIONS

1 / 1 PageView full catalog

WIRE / STRAND SECTIONS

Product catalog summary

Wire Specifications:

Diameter (Ø): Ranges from 0.1 to 1.0 mm, with other sizes available upon request.
Coatings: Options include uncoated (U), PTFE (P), and hydrophilic (H).
Lengths (l): Customizable up to 5,000 mm.
Material: Stainless steel 1.4310 or Nitinol.
Coating and Taper: Customizable.
Tolerances: Vary with length, ranging from +/- 1 mm to +/- 3 mm.

Strand Specifications:

Nominal Diameter (Ø): Ranges from 0.09 to 2.0 mm.
Lengths (l): Up to 5,000 mm.
Type of Construction (k): Options include 1 x 7, 1 x 19, 7 x 7, and 7 x 19.
Material: Stainless steel 1.4401 or 1.4310.
End Finish: Rounded ends, with the possibility of balls.
Tolerances: Vary with length, ranging from +/- 1 mm to +/- 3 mm.

Additional Information:

Custom manufacturing of wire and strand sections is available according to specific requirements.

Contact Information:

Address: Paul-Lechler-Str. 14, 72581 Dettingen an der Erms, Germany
Phone: +49 7123 910 19-0
Email: [email protected]

Catalog excerpts

WIRE / STRAND SECTIONS In addition to our standards we also manufacture wire- / strand- sections according to your specifications and wishes. (standard 0.1 - 1.0 mm; other on request) stainless steel 1.4310 or Nitinol rounded, balls are individually possible Mail: [email protected]

Open the catalog to page 1

WIRE / STRAND SECTIONS

WIRE / STRAND SECTIONS

Catalog excerpts

All Endox Feinwerktechnik catalogs and technical brochures