EN-CARDIO - BIKE REHA The Bike Reha is the ergometer cycle for cardio-respiratory training, The Bike Reha is interesting for (professional) athletes too. The rehabilitation and sports training in general. This ergometer cycle resistance can be varied from 20 to 400 Watts! The cycle offers is exceptionally well suited for a wide group of patients and clients the possibility to perform various tests such as the VO2-Max test, due to its adjustability, its easy entry and its different test modules. and the 3- and 12-minutes tests. This means it is possible to gain insight into various aspects of the condition of the athletes. THE REHABILITATION BIKE The Bike Reha allows for exercising of patients with movement EN-TRACK COMPATIBLE impairments and disabilities. This is due to: The Bike Reha can be controlled from the EN-Track concept so that the entire training can be put together beforehand in a simple ●● the horizontal and vertical adjustability of the saddle, way. The exercise protocol and the individual training values of the ●● the horizontal and vertical adjustability of the handlebars, cycle are automatically set by means of a chipcard. The results are ●● the adjustability of the cranklength (option). monitored in the software, where progression and regression are In addition, this ergometercycle is exceptionally well suited for incorporated in the training program. cardiorespiratory restricted patients since it is possible to set an exceedingly low resistance of just 20 Watts. EASY AND WELL SUITED FOR ANYBODY The Bike Reha is exceptionally easy to operate. With the aid of the UNIQUE "CONSTANT TORQUE" MODE EN-Track chipcard everything is automated, but even without it the With the Bike Reha, overload of the rehabilitating patient is avoi- bike can be operated by anybody! A sophisticated and extensively ded since the “torque” can be kept constant. For ergometer- tested interface ensures that everyone, young or old, can easily get cycles without torque control, a decrease of the number of going with this high performance ergometer. rotations per minute (RPM) will result in an increase of resistance. With these ergometers the risk of overload may occur, since the resistance will rise as the patient pedals more slowly. In addition, this is extremely frustrating for the patients, since, when they become tired, the exercise becomes even harder! With the Bike Reha and the constant torque mode, this is avoided. Your patients will be able to rehabilitate in a safe and pleasant way. THE BIKE REHA IS INDISPENSABLE TO ANY PRACTICE!

EN-CARDIO - BIKE REHA 1413921 BIKE REHA 1413922 BIKE REHA INCL. ADJUSTABLE CRANKS ●● Low step-through ●● Uniformity in operation ●● Clear display ●● Ergonomic design ●● Wear-resistant eddy-current brake ●● Pulse monitoring by means of Polar® chest-belt and built-in receiver ●● Low-noise belt-drive ●● Smart-card technology ●● Handlebar horizontally and vertically adjustable ●● Saddle horizontally and vertically adjustable ENRAF-NONIUS P.O. Box 12080 3004 GB Rotterdam The Netherlands T.: +31-(0)10 - 203 06 00 E: [email protected] www.enraf-nonius.com

EN-CARDIO - BIKE REHA TECHNICAL SPECIFICATIONS: Mains voltage: 100 – 240 V Frequency: 50 - 60 Hz Power consumption: approx. 40 VA Braking principle: process-controlled eddy-current brake Load: 20-400 W (resolution: 5 W increments) rpm-independent from 35-110 rpm 6-60 Nm (resolution: 0,5 Nm increments) rpm-independent from 35-110 rpm Heart rate monitoring: by means of Polar® chest strap and receiver Dimensions (lxwxh): 118 x 55 x 115 cm Weight: approx. 55 kg Saddle height (adjustable): 50-110 cm Steering column height (adjustable): 75 - 115 cm Length fixed crank: 170 mm Length adjustable crank:...