EN-TREE PULLEY EN-TREE PULLEY 24 KG With EN-Tree products, active exercise is possible for almost anyone. Healthy individuals, patients with specific exercise requirements and wheelchair users can enter into their own training programs. This is possible because of the wide variety of load application and the ease of adaptation of the EN-Tree to every individual’s need. The EN-Tree Pulley allows an increase of the weight from 0,25 to 24 kg in 30 small steps. The EN-Tree Pulley, allows the exercise of almost every human movement. This includes mono-articular movements as well as complex displacements. 3443369 EN-TREE PULLEY MDD 24 KG WITH COVER

EN-TREE PULLEY EN-TREE PULLEY EXPLOSIVE 54 KG The EN-Tree Pulley Explosive is constructed for high speed, explosive movements, which occur for example during sports activities like tennis and soccer. This allows for high velocity movement without high inertia. The EN-Tree Explosive provides the optimal balance between acceleration and resistance for high speed training. The EN-Tree Explosive is provided with 54 kg of weight, which effectively means a maximum weight of 18 kg. 3443354 EN-TREE PULLEY EXPLOSIVE 54 KG 3443370 EN-TREE PULLEY EXPLOSIVE MDD 54 KG, WITH COVER

EN-TREE P The EN-TreeP (for pneumatic) is a pulley system that does not make use of the traditional weights, but rather a pneumatic resistance. In addition to the advantages of a traditional pulley system, such as versatility, requires little space and good accessibility, the pneumatic system like the EN-TreeP has a few more advantages: ●● an extremely low minimum load ●● a high maximum resistance ●● it is possible to increase the load in very small steps ●● Silent during exercising ●● no mass inertia due to the pneumatic resistance, making the ENTreeP the ultimate Explosive pulley ●● a pulley...

In physical therapy and rehabilitation it is very important to quan- The goals of treatment can be determined by: tify the functional capacity of the human muscular-skeletal system. This is in order to determine the appropriate individual load during ●● assessment of normal or abnormal movement patterns from the graphs; exercise therapy or to evaluate the progress during rehabilitation. ●● comparison of test results between individuals Custom systems for the measurement of functional capacity require Progress during rehabilitation can be monitored by comparing the many square meters of floor...

3443365 EN-TREE M MDD 24 KG, WITH COVER 3443367 EN-TREE M EXPLOSIVE MDD 54 KG, WITH COVER

EN-TREE BENCH & TRAIN EN-TREE BENCH Two-section MTT training bench The stable basis for MTT-suitable for both therapeutic support and personal use. ●● Practical and easily adjustable ●● Inclinable, length-adjustable backrest ●● Equipped with inclinometer ●● Adjustable seat cushions ●● Seat cushions gently inclinable TECHNICAL SPECIFICATIONS Dimensions (hxwxl): 48x47x134 cm Weight: 25 kg Maximum load per section in its lowest position: 135 kg Angle adjustment: back-section: 0° to 75° leg-section: 0° and 7° EN-TREE TRAIN MTT angle/mobilization bench Two-section are easily adjustable. The EN-Tree...

ACCESSORIES EN-TREE EN-Tree 24 kg Exercise stool, height 65 cm Set accessories for EN-Tree Pulley (1) Pull down accessory Triceps handgrip Foot sling Padded ankle belt Wrist trainer

EN-TREE TECHNICAL SPECIFICATIONS Articlenumber Provided with cover Height adjustment for rope Adjustable weight / load Effective weight/ load with one cord end Effective weight/load with two cord ends combined INSTALLATION REQUIREMENTS EN-TREE: EN-Tree should be mounted to the wall with 4 screws and plugs. The wall should be firm enough to resist forces up to 950 N (thus do not attach it to carton-board or thin wooden walls). Leave about 2.5 m2 free around every pulley for optimal exercise. INSTALLATION REQUIREMENTS EN-TREE M The EN-TreeM needs a computer for full operation. The computer can...