SCF 400 DG Thermostatic oven forced air circulation capacity liters 400 Our thermostatic ovens may be employed in different applications as, for example, for dry sterilization cycles, for thermal tests on materials (to verify resistance or deformations), or for any other work needing a uniform and careful warming process. Key Features Full stainless steel construction, internal walls AISI 430, external structure AISI 304 “Scotch Brite”, allows maximum corrosion resistance and easy cleaning Internal chamber with laminar air circulation and uniform warmth distribution offered by two lateral convection ducts with perforated walls and by resistors position in pre-warming chamber Motor with fan for air circulation fixed in lateral position, allows an horizontal and diagonal air flow among all the volume of the chamber. Thermal insulation by high quality mineral fiber in adequate thickness. Front door with thermal insulation (one or two according to the model), with silicone rubber gasket. Perforated stainless steel AISI 430 lean shelves, extractable and fixable on different heights. Pass-through port (on the back wall) for exhaust air external probes (on request) Rubber antiskid feet adjustable in height. Standard thermal equipment Digital P.I.D. controller with autotuning, PT100 probe Temperature range: from +10°C above ambient up to + 250°C Visualized resolution: three digits (1°C), double display (set point, measured temperature) - on request resolution 0,1°C Double overtemperature protection system: a.Safety independent adjustable thermal controller (3.1 class – DIN 12880), is activated in case of default of the main digital controller or of the main probe, with visual alarm b.Safety device with adjustable entry point related to set point (fixed 5°C beyond set point), in case of default of the main digital controller, with visual alarM Temperature uniformity in the chamber: ± 1,5°C at 150°C Thermal Accuracy (time): ± 0,3°C at 150°C Manufactured is in compliance with the DIRECTIVES of the EUROPEAN COUNCIL 2006/42/CE (Machinery Directive), 2014/35/UE (Low Voltage Directive), 2014/30/UE (EMC Directive) and standards EN 6101- 1:(2001). Factory temperature calibration certificate (standard 1 measure for 3 points of the chamber) On request: Serial interface RS485 – RS232 Management software (reporting, graphics, alarms, running process visualization) 4 wheels Kit for floor stand (n.2 with brake) Dati tecnici Internal dimensions (mm) WxHxD External dimensions (mm) (except for opening knob) WxHxD Capacity litres Shelves no. Doors no. Weight (Kg) Power W (230V 50-60Hz) On request other voltage/tension We produce ovens on speci

and/or on Customer demand and for continuous work from 250 to 350°C Dimensioni esterne del prodotto Altezza Larghezza Profondità Peso SCF 400 DG Thermostatic oven forced air circulation capacity liters 400 Accessori Foto 4 cycles ramp+soak Programmer - Digital Timer 99h, 59'. Programmer 8 programs up to 12 segments (6 ramps + 6 permanencies) - Digital Timer 99h, 59’. 3.5 ”color touch screen programmer Programmer 200 segments, 90 programs in memory, Real Time Clock, with USB port USB port with RS 485 converter, for data recording Digital daily - weekly Timer 24 h - week days Videographic colours...

Supplementary perforated stainless steel shelves AISI 430 for models SCN-SCF-TS-TSF 400 By-pass duct for external thermometric probes Stainless Steel AISI 304 Floor stand for models SCN-SCF-TS-TSF 400 3/3 Powered by TCPDF (www.tcpdf.org)