1. Catalogs
  2. Envair
  3. Blood labelling isolators

Blood labelling isolators

Blood labelling isolators

Blood labelling isolators

Product catalog summary
Overview: The document is a product sheet for the Blood Labelling Isolator 127 by Envair Limited, designed for safe aseptic blood labelling in nuclear medicine. It emphasizes operator protection and product safety through negative pressure and EU GMP Grade A unidirectional airflow.
Specifications: The isolator features a main chamber with white polyester coated stainless steel, optional 316L stainless steel, and a unidirectional airflow system. It includes a D type double HEPA filtered transfer chamber with electromagnetic interlocks and a high air change rate. The model supports easy cleaning and safe filter changes.
Model Details: The 2G2D model includes two glove ports, two transfer chambers, and an exhaust spigot. It requires a remote fan for the exhaust system, which can be ordered from Envair.
Standards Compliance: The isolator complies with BS EN ISO 14644, EU GMP, BS EN 1822 (HEPA filters), IEC 61010-1:2001, and AS 4273:1999 (with optional carbon filter).
Controls and Electrics: The isolator is equipped with a PLC control system, touch control HMI panel, and digital displays for various functions. It includes alarms for pressure and air change rate failures, with battery backup.
Airflow and Filtration: The primary HEPA filter is located under the work tray, filtering downflow air and air from transfer chambers. The system includes a vertically mounted anti-blowback damper and manual shut-off valve.
Testing and Maintenance: The isolator includes DOP/particle counter test ports and allows maintenance from the front. It offers various optional features, including a vapour phase hydrogen peroxide biodecontamination system and CCTV monitoring.
Additional Options: Optional features include thimble system models, stainless steel finishes, and various electrical supply configurations.
Product Range: Envair offers a range of clean air and containment products, including unidirectional airflow cabinets, powder handling products, microbiological safety cabinets, fume cupboards, and various isolators.
Service and Maintenance: Envair provides full testing, service, maintenance, and spares support for all its equipment.
See more

Catalog excerpts

Blood labelling isolators-1

Blood labelling isolator Product Sheet No. 127 April 2009 For safe aseptic blood labelling in nuclear medicine Negative pressure for operator protection and safety Most commonly used centrifuges catered for EU GMP Grade A unidirectional airflow work area for aseptic work and product protection Automated pressure decay leak test for indicating results and monitoring trends Transfer chamber with electromagnetic timed interlocks and high air change rates for total suppression of airborne contamination during material transfers in and out, and for rapid evaporation of disinfecting agents Centrifuge transfer chamber with mechanically locked visor Airflow diagram Envair Limited York Avenue, Haslingden, Rossendale, Lancashire, England BB4 4HX T: +44 (0) 1706 228 416 F: +44 (0) 1706 242 205 E: [email protected] W: www.envair.co.uk PLC controls for easy set up, operation and maintenance Good access to all potentially contaminated areas to facilitate cleaning Safe to change main (primary) filter Two-glove standard model. Thimble exhaust units also available

 Open the catalog to page 1
Blood labelling isolators-2

Blood labelling isolator 127 Model designations and dimensions Model Description Power Watts Two glove ports, two transfer chambers, exhaust spigot for connection to dedicated exhaust system (see note below) * * Exhaust system requires remote fan which should be ordered from Envair or to Envair’s specification Standards compliance: BS EN ISO 14644 EU GMP BS EN 1822 (HEPA filters) IEC 61010-1:2001 (Electric wiring) ‘Pharmaceutical Isolators’ Pharmaceutical Press 2004 AS 4273:1999 (when optional activated carbon filter is fitt

 Open the catalog to page 2
Blood labelling isolators-3

Blood labelling isolator 127 Specification and options Main Chamber White polyester coated stainless steel internally Optional 316L stainless steel polished internally Unidirectional airflow (vertically downwards) - 0.4 m/s +/- 20% Downflow air change rate indicative 2000 air changes per hour 316L stainless steel removable dished worktray Optional stainless steel hanging rail with six hooks 3mm Lead lining to base and front lip Transfer Device D type double HEPA filtered transfer chamber with electromagnetic interlocks on adjustable timers, footswitch for inner doors, and sliding tray High air...

 Open the catalog to page 3
Blood labelling isolators-4

Complete range of Envair products and services CDC F cytotoxic Pharm-Assist isolators Technetium isolator Blood labelling isolator Negative Pharm-Assist dispensing isolators for nuclear medicine for nuclear medicine isolators Customer specified isolators Sterility test isolators Controlled atmosphere Micro-lso and Mini-lso Unidirectional airflow products HLF horizontal unidirectional VLF R vertical unidirectional C-Flow vertical VLF E vertical unidirectional FFM fan filter modules (laminar) airflow cabinets (laminar) airflow cabinets unidirectional (laminar) (laminar) airflow enclosures airflow...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.