3D-Bioplotter® Manufacturer & Developer Series (4th Generation) The 3D-Bioplotter® System comes in two version to match the needs of varying users and budgets. The 3D-Bioplotter® Developer Series is the ideal choice for the basic needs of Tissue Engineering and educational institutions, while the 3D-Bioplotter® Manufacturer Series offers all options needed by the advanced operator. For an overview of differences between the models please refer to the table below: Manufacturer Series Developer Series 5 different cartridges can be used during the 2 different cartridges can be used during the same build job same build job (optionally upgradable to max. 3) 1x Low and 1x High Temperature Head Particle and sterile filters Needle position control via photo sensor Heating and cooling capabilities on building platform 4 external temperature sensor ports Semi automatic material calibration EnvisionTEC GmbH Particle filter only Needle position control via high resolution camera Automatic z-height controlling system for changeable platform add-ons, e.g. petri dishes PC with machine control software EnvisionTEC, Inc. 15162 S. Commerce Dr Dearborn, MI 48120 • USA Phone +1-313-436-4300 Fax +1-313-436-4303 Axis Resolution (XYZ): 0.001 mm (0.00004”) Speed: 0.1 - 150 mm/s (0.004” - 5.91”/s) Build Volume: 150 x 150 x 140 mm (5.91” x 5.91” x 5.51”) www.envisiontec.com [email protected] Minimum Strand Diameter: 0.100 mm (0.004”) - Material Dependent Automated nozzle cleaning process