Raise your mammalian cell culture research to the next level Accelerate Your Growth The New, GMP-compatible CellXpert® CS220 CO2 Incubator Shaker

GMP-compatible 180 °C sterilization routine integrated: Certified 6 log microbial reduction; downloadable performance protocol; heatresistant IR for consistent CO2 control Powerful evaporation protection: Active humidity control including dehumidification and direct heating of chamber walls Up to 40% higher flask capacity: 8x 7/5L Corning®/Thomson Optimum Growth®; 25x 1L, 42x 500 mL, 102x 125 mL Erlenmeyer flasks (on sticky pad) Stainless steel chamber: Hygienic design according to EN ISO 14159:2008 standard; few, quick-removable internal parts; chamber depth of just 58 cm / 22.8 in make it easy...

Up to 40% higher flask capacity Accelerate your research by increasing the culture volume and ensuring the same growth conditions for more flasks per run. The extra-large platform of the CellXpert CS220 (4780 cm2/1882 in2) offers more capacity than most other CO2 shakers. > 8x 7/5 L Corning / Thomson Optimum Growth Excellent use of lab space: Greatest platform size to footprint ratio of large CO2 shakers in the market Don't waste an inch of your lab on equipment that isn't fully designed for the highest throughput. Left: The space-saving door glides up and out of your way to ensure easy vessel...

Nowhere for contaminants to hide: Seamless, stainless steel chamber Hygienic design according to EN ISO 14159:2008 standard plus only a few screws and quick-removeable internal parts, shaker drive outside the chamber; no crevices, cover sheets, cables, or heating fins inside. Platform and sub-platform can be removed easily in under 90 seconds for full access to all chamber walls for fast cleaning – no cover sheets that hide more. Unique Contamination Protection Unique and effective contamination risk mitigation: Integrated, certified 180 °C sterilization routine Almost all current CO2 incubator...

Discover MoreSave money and reach sustainability goals > Superior platform size vs. footprint ratio in the market saves valuable lab space > While only available as costly options with most other devices in the market, the slide-out platform, rH-control with de-humifiication, fan-associated HEPA-filters, touch interface, access port, and sterilization routine (180 °C) come standard on all CellXpert CS220 packages > No UV-lamps or open water bath plastic inlays that require frequent exchange > Routine wipe-disinfection done in only a few minutes Smart cell cultivation and easy documentation with...

Built to Perform & Last Do you need to avoid unexpected downtime and delayed results? Are you looking to focus on more important tasks than arranging repairs for your CO2 incubator shaker over the weekend? The Eppendorf X-drive with four weight-supporting shafts has been proven and tested in the market. It was designed to perform 24/7 at high loads with the Eppendorf reliability you can rely on; you can reach your goals in time and with peace of mind. Drive and drive wheel are positioned in a service drawer that opens to the front for easy access for check and maintenance. Peace of Mind, Your...

Technical specifications Orbit options 20 - 300 rpm with 2.54 cm (1 in) orbit, 20 - 250 rpm with 5.1 cm (2 in) orbit Capacity & maximum flask size, 8x 7/5 L Corning® & Thomson Optimum Growth® (max. flask size), 25x 1 L Erlenmeyer flasks, sticky pads on universal platform 42x 500 mL Erlenmeyer flasks, 102x 125 mL Erlenmeyer flasks Temperature range 8 °C above ambient temperature - 60 °C Relative humidity range Active bidirectional humidity control up to 85 % relative humidity, non-condensing Installation options Single unit on base or high feet; Double-stack on low feet or high feet; Triple-stack...

Ordering information Description CellXpert® CS220 CO2 incubator shaker, stackable up to 3-fold, orbit 2.5 cm (1 in) CellXpert® CS220 CO2 incubator shaker, stackable up to 3-fold, orbit 5.0 cm (2 in) High feet, 9 cm (3.5 in), 1 fixed and 3 height-adjustable, for single device or 2-3x stack, for easy cleaning below device and access with standard forklift to move devices, 9 cm/3.5 in minimal feet height, Eppendorf service required for installation Low feet, 2 cm (0.8 in), 1 fixed and 3 height-adjustable, for easiest access to top device in 3x stack , Eppendorf service required for installation...