Catalogs >
Erbrich Instrumente >
Pelvic Orthopaedy

Pelvic Orthopaedy
10Pages

Catalog excerpts

Drill Bit 3.2 mm 195 mm Drill Bit 4.5 mm 195 mm Taps 3.5 mm Taps 4.5 mm Screw Drivers 2.5 mm Screw Drivers 3.5 mm Depth Gauge Bending Forceps Bending Templates for curved Plates Bending Templates for straight Plates Bending Iron

Open the catalog to page 1

Becken Orthopadie Pelvic Orthopaedy 17-1420 Bending Templates for curved Reconstruction Plates 4.5 mm 17-1422 Bending Templates for straight Reconstruction Plates 4.5 mm 17-1424 Bending Templates for curved Reconstruction Plates 3.5 mm 17-1426 Bending Templates for straight Reconstruction Plates 3.5 mm 17-1400 Bending Pliers for 2.7 mm and 3.5 mm Plates for 3.5 mm and 4.5 mm Plates 17-1432 Osteotomy Chisels 304 mm

Open the catalog to page 2

Pelvic Basis Set 1/1 Standard-Container,silver, 580 x 280 x 100 mm Wire Basket, 540 x 255 x 50 mm Tap Handle Sharp Bone Hook Pelvic Retractor Pelvic Repositions Forceps 190 mm Pelvic Repositions Forceps 260 mm Reduction Forceps 200 mm Pelvic Repositions Forpceps 190 mm Pelvic Repositions Forpceps 230 mm Pelvic Repositions Forpceps 250 mm Pelvic Repositions Forpceps 400 mm Pelvic Repositions Forpceps 400 mm Straight Ball Spike Schanze a 6 mm 200 mm Pelvis Reduction Forceps

Open the catalog to page 3

Becken Orthopadie Pelvic Orthopaedy 9-090 Tap Handle for Jacobs Chuck 9-676 long wide tip for Pelvic Surgery, width 24 mm 9-521 Pelvic Reposition Forceps 190 mm for Screws 3,5 mm 9-523 Pelvic Reposition Forceps 190 mm for Screws 4,5 mm 9-604 Reduction Forceps with points 200 mm

Open the catalog to page 4

Becken Orthopadie Pelvic OrthopaedyPelvic Instruments 17-1556 Pelvic Reposition Forceps 400 mm 17-1558 Pelvic Reposition Forceps 400 mm

Open the catalog to page 6

Pelvis Reposition Forceps 17-1600 Straight Ball Spike 12“ A new shifting technique permits adjusting of the holding area within seconds and without dismanteling the instrument. 35 Easy and quick fixation in both directions by means of 2 nuts

Open the catalog to page 7

Becken Orthopadie Pelvic Orthopaedy Pelvic Basis Implant Set T172 Pelvic Basis Implant Set

Open the catalog to page 8

Becken Orthopadie Pelvic OrthopaedyPlates for Pelvic Fractures Reconstruction Plates - 4.5 mm For use with 4.5 mm cortex screws. Can be bent in three dimensions with special bending irons (do not bend more than 15° between holes) Distance between holes: 16.0 mm Length Holes Length Holes Curved Reconstruction Plates - 3.5 mm Primary Indication: Pelvic and acetabular reconstructive surgery Distance between holes: 12.0 mm Curving radius: 100.0 mm For Operation of symphysis-scission

Open the catalog to page 9