Innovations and Thermoforming Units
12Pages

{{requestButtons}}

Catalog excerpts

Innovations and Thermoforming Units - 1

Innovations and Thermoforming Units IDS 2017

Open the catalog to page 1
Innovations and Thermoforming Units - 2

Liskosil is available in three sizes: Liskosil - s, approx. 16 mm diameter and 2 mm thickness Liskosil - m, approx. 27 mm diameter and 2 mm thickness Liskosil - l, approx. 27 mm diameter and 4 mm thickness  New: Liskosil - s / - m / - l An extraordinary polishing disc with high life time for all thermoforming materials and more ... • Liskosil is a fine-abrasive polishing disc, which does not only allow for finely dosed removal of material but can also very quickly remove larger amounts of material through increased contact pressure. • No matter if the surface will be polished coarsely or...

Open the catalog to page 2
Innovations and Thermoforming Units - 3

Liskosil - l is particularly useful for treating larger areas. Larger amounts of material can be removed without leaving an edged surface behind.  223 250 Liskosil, start set One polishing disc each of Liskosil -s, -m, -l and 3 mandrel ... for Usig ... for printing materials and more ... 223 220 Liskosil - s polishing discs, 6 pieces and 1 mandrel 223 230 Liskosil - m polishing discs, 6 pieces and 1 mandrel 223 240 Liskosil - l polishing discs, 6 pieces and 1 mandrel 223 250 Liskosil start set, one disc each of Liskosil -s, -m, -

Open the catalog to page 3
Innovations and Thermoforming Units - 4

 New: Erkopress Pressure forming device with automated thermoforming process to connect with the existing compressed air system. Erkopress motion, technical data: H 32 /  W 33 / D 43 cm weight 18,9 kg foil diameter 120 mm foil thickness 0 - 5.5 mm ~220  - 240  (100, 110  - 120) volts, 50 - 60 hertz power: 380 watt working pressure 6 bar noise level < 70 dB(A) 3 • Program the foil • Insert foil • Start the heating process • Place model now at the latest • Everything else will be done by the Erkopress motion! • The thermoforming process as well as the cooling time will run automatically. •...

Open the catalog to page 4
Innovations and Thermoforming Units - 5

Touchpanel • The program contains all Erkodent thermoforming materials and as a quick guide, supported by animations, it leads through the workflow, and signalizes the necessary work steps. • Choose the desired foil and thickness and start the process. • The displayed thermoforming temperature and the cooling time can be adjusted for special applications, without modifying the standards. • Frequently used foils can be saved as favorites. • New foils will be stored as favorites. (Or maybe: Self-defined foil parameters can also be stored as favorites.) • Even modified factory settings can be...

Open the catalog to page 5
Innovations and Thermoforming Units - 6

 New: Erkopress ci motion Pressure forming unit with automated thermoforming process with self-sufficient, integrated production of compressed air Erkopress ci motion, technical data: H 32 / W 33 / D 43 cm weight 21,3 kg foil diameter 120 mm foil thickness 0 - 5.5 mm ~220  - 240  (100, 110  - 120) volts, 50 - 60 hertz power: 440 watt working pressure 6 bar noise level < 70 dB(A) 5 • Program the foil • Insert foil • Start the heating process • Place the model now at the latest • Everything else will be done by the Erkopress ci motion! • The Erkopress ci motion has a powerful, integrated...

Open the catalog to page 6
Innovations and Thermoforming Units - 7

In a reserve pressure chamber a pressure of 7 bar is build up after the Erkopress ci motion has been switched on. This pressure will be maintained independently of the programming sequence. Thereby 6 bar will be available for the forming. The low operating noise of the integrated compressor is a distinguishing feature, while continuously maintaining the available pressure. Same as the Erkopress motion the Erkopress ci motion complies with the legal regulations in regards to occupational safety, construction and classification. Both units can also be used as pressure pot for autopolymerizing...

Open the catalog to page 7
Innovations and Thermoforming Units - 8

 188 400 Erkoform-3dmotion Thermoforming unit with automated thermoforming process • Program the foil • Insert foil • Start the heating process • Place the model now at the latest • Everything else will be done by the Erkoform-3dmotion! The thermoforming process and the cooling time will run automatically. Erkoform-3dmotion, technical data: H 31,5   / W 35  /  D 37 cm weight 13,9 kg foil diameter 120 mm foil thickness 0 - 5.5 mm ~220  - 240  (110  - 120) (100) volts, 50 - 60 hertz power: 340 watt max. vacuum 0.8 bar noise level < 60 dB(A) No compressed air supply required, plug and play. No...

Open the catalog to page 8
Innovations and Thermoforming Units - 9

Same features as Erkoform-3dmotion just without the automated thermoforming process. Also the touch panel functions are the same. In both units a large volume reserve vacuum is being held to allow a sudden forming. A sensor for touchless temperature measurement ensures the accurate temperature of the material for the thermoforming regardless of the ambient temperature. The units are equipped with a medium-wave infrared heating, which doesn’t need preheating time. The medium-wave allows for the materials to heat up not only on the surface but also in-depth. The result is a less stressed...

Open the catalog to page 9
Innovations and Thermoforming Units - 10

  188 580 Occluform-3 Occluform-3, a unique occludator for the Erkoform units of the 3 series With the Occluform-3 the opposing bite can be imprinted optimally in the malleable thermoforming material during the thermoforming process. The construction of the Occluform-3 unit is based on a Bonwill triangle with side length of 11.5 cm and a Balkwill angle of 20°. 9 Due to measurements that are in accordance with the ones of a state of the art average movement articulator, the Occluform-3 allows for a mean/mid-value rising of the bite. With the help of the Occluform-3 the models can be...

Open the catalog to page 10
Innovations and Thermoforming Units - 11

New: Erkodur, new foil thickness Erkodur (clear) and Erkodur-freeze Following a customer's request, it's now immediately available also in 2.5 mm thickness. The areas of application are all types of occlusal splints, dressing plates, drilling templates and particularly recommended for the tougher splints of the Silensor-sl. Availabilities: 52 12 25 Erkodur, clear, thickness 2.5 mm, diameter 120 mm, 10 pcs 52 42 25 Erkodur, clear, thickness 2.5 mm, diameter 120 mm, 50 pcs 52 91 25 Erkodur-freeze, transparent-turquoise, thickness 2.5 mm, diameter 120 mm, 10 pcs 52 94 25...

Open the catalog to page 11

All ERKODENT Erich Kopp catalogs and technical brochures

  1. Thermoforming

    40 Pages

  2. Program

    28 Pages

  3. silensor-sl

    2 Pages

  4. Thermoforming

    40 Pages

  5. tztG_EN

    12 Pages

  6. Erkoform-3

    1 Pages

Archived catalogs

  1. Erkoform-3d

    2 Pages