New products 2013
1 / 12Pages

• Playsafe triple • Erkoloc-pro green • Erkoloc-pro 1.0/1.3 mm • Erkodur freeze • Oxydens • prebite Pelosi • take-off pliers • on-off magnet • Silensor-sl modified

The Erkoform-3d motion is the first Erkodent thermoforming unit with automated thermoforming process. 1 Program foil 2 Insert foil 3 Start heating process, now or even before place model in the unit 4 Time for other, everything else will be carried out by the Erkoform-3d motion! The thermoforming process and the cooling time run automatically.

The automatic is limited to the really expedient working step, namely the actual thermoforming process. This saves the necessary going to the unit in order to move the hot foil from the heating to the model and to thermoform. The field of use and the technical data correspond to those of the Erkoform-3d except for a considerably improved touchpanel and operating concept. • No compressed air supply required - plug and play • Touchless temperature sensor • No preheating time • Sudden vacuum, built up before thermo- forming process (pat. 19511064) • Vertical prestretching and forming produces...

triple Laminated, three-layered sports mouthguard by thermoforming only one time? No problem with the Playsafe triple foil, inside and outside soft and in between hard. 1 Articulate models in the Occluform-3 2 Thermoform 3 At the same time imprint the articulation surface in a tricky way 4 Allow to cool down and finish, if desired also apply the label, ready

The better protective effect of laminated sports mouthguards in comparison to single-layered mouthguards is sufficiently known. However, the fabrication of laminated sports mouthguards is much more complex. A Playsafe triple can be fabricated in about the same time as single-layered sports mouthguards. But provides at least the same protective effect at smaller proportions as the laminated top version Playsafe heavy-pro. The imprinted articulation surface that allows movement for the athlete shows a lateral stop (buccal shield). This can absorb lateral impacts. triple The most simple and...

New thermoforming materials Erkoloc-pro green and Erkodur freeze ... ... additional colours fulfill customer demands Erkoloc-pro 1.0 mm + 1.3 mm ... ... additional thicknesses increase the application possibilities Erkoloc-pro green, the coloured double-layered plate in 2.0 to 5.0 mm thickness, the soft side is always 1.0 mm thick. Same use as Erkoloc-pro and Erkoloc-pro blu. The coloring counteracts discolorations. Erkoloc-pro green Silensor-sl Erkoloc-pro green Michiganschiene

Erkoloc-pro, the proven double-layer plate in 1.0 mm thickness, 0.4 mm soft and 0.6 mm hard, is used for bleaching trays, medication trays and for very comfortable correction splints. Erkoloc-pro, the durable double-layer plate in 1.3 mm thickness, 0.4 mm soft and 0.9 mm hard is used for comfortable stabilization splints, but mainly for correction splints in the orthodontic field. It is available in thicknesses from 1.0 mm upwards. The splint is used where it shall or may be visible. Or simply the colour is liked. Erkodur freeze occlusal splint As Erkodur it is break-stable, tough and...

Oxydens cleansing tablets • remove plaque and mineral deposits and Oxydens Clean-set • remove smells • fresh and clean splints Hygiene for dental splints • prevent discolouring • practical Oxydens Clean-set for Playsafe sports mouthguards, Silensor-sl anti-snoring devices, for hygienic use and storage bruxism splints, orthodontic appliances, correction splints, retainer, dentures etc. Oxydens Clean-Set: 280 030 32 tablets, 1 Clean-box, 1 Clean-cup Oxydens cleansing tablets: 280 032 32 tablets

immediate splint temporary occlusal splint for immediate pain release and splint effectiveness testing In 5 minutes the splint is ‚ready to go‘. Soften moulding blank for 10 - 15 seconds in boiling water, shortly dip in cold water and adapt onto the lower jaw, have the patient bite and wait for approx. 2 minutes, take it out and cut the handle, finished.

on-off magnet take-off pliers Smart magnet to collect high-grade steel granules. The granules will be strongly attracted but do no longer have to be plucked with effort from the magnet. Pull once at the handle and the granules fall off again. Pliers for easily taking hard thermoformed splints off the model.

improved connector improved modelling pad with angular sides placing and filling of undercuts with Erkogum enlarged undercut area: leads to a considerably better retention of the anchors also in Erkoloc-pro projecting point: in the area of the upper canine the point shows towards the root (towards the gingiva, cranially, upwards), this facilitates the orientation when exchanging connectors bridges: prevent that the connectors accidentally jump out of the anchors, for ex. when cleaning the appliance or with extreme lateral movements and improve the shape memory of the connectors

Copyright by Erkodent • Printed in Germany • S 15-3103-11