STR - 75 Non Vacuum - Model ERS 2000
1Pages

Autoclave Devices and Equipments Vertical Type Autoclave (Laboratory Type Cylinder) Vertical Type Sterilizers have flywheel cover system. Device sterilize texlile materials, surgical and dressing equipments, rubber-glass materials and bottled liquids in the enduring and sensitive packages with pressurized saturated steam. Device make sterilization at 121°C and 134T. "Liquid sterilization" program is also available. Autoclave device works at 230-400 (±%10) Volt and AC;50 (±%3) Hz. Mains voltage. Device has 2000-6000 watt power capacity and works in room terms, is produced as wheeling type providing it to be used as mobile in case of necessity. On vacuum pumps models, device has the structure with vacuum.otomatic controLmicro- processor, cylinder cover. "Pre-vacuum, Steam Loading", Sterlization, Final vacuum" processes are done automatically. Device chamber's axis is vertical,utilizable sterilization volume is 75 It or 85 It optionally. Sterilization room of device is double-hulled (with steam jacket) and steam generator is placed between the hulls. Device's construction is made of AISI304 quality stainless steel or electrostatic profile, cell and jacket materials are made of "AISI 304 and AISI 316L"quality stainless steel.AH device components are mounled on this cage and in the event of the service can be given easily. In device's water and steam lines,"AISI 304 and AISI 316 quality stainless steel and copper pipes" are used. Device's all surfaces are covered by AISI 304 quality stainless steel. A sterilization basket made of stainless steel is available in device. Cover can be opened and closed by one moving bar. Cover impermeability is provided silicon gasket enduring heat. On the models with vacuum pump,after device is programmed to required fixed temperature process, in the case of power is gone and come back in operation if cabin temperature is at set limits, it continue working from where it stops. All programs of device are executed by microprocessor control system. After device's last vacuum process, 0.2 pm biological filter is available on the line of vacuum breaking. Both electrical (stopping heater) and mechanics (discharging excessive pressure) against pressure is available.