One more step in ultrasonic surgery BOOK TIPS

dimostrativo. Esacrom reserves the right to make any changes to the contents of this publication without notice. The images are only for demonstration purpose.

DISPOSITIVI MEDICALI E TECNICHE AVANZATE MEDICAL DEVICES AND ADVANCED TECHNIQUES PUNTE Unici con oltre 100 punte T-BLACK TIPS The only ones with over 100 T-BLACK tips TRATTAMENTI DELLE SUPERFICI T-BLACK toccare con mano Effetto SURFACES TREATMENTS T-BLACK T-COR n process. We are eliminating diamond from tips T-COR abrasivo eliminando il diamante dalle punte MICRO-SHARPENING: Implant Kit SUS-SURGERY ULTRASONIC SITE Zygoma kit Milling MICRO-AFFILATURA: Kit implantare SUS-SURGERY ULTRASONIC SITE Kit zigomatici Fresaggio BRAND NEW USE TECHNIQUES SUS-SURGERY ULTRASONIC SITE Elliptical Swing NUOVE...

| TIPS UNICI CON OLTRE 100 PUNTE T-BLACK DEDICATE PER SPECIFICHE PROCEDURE THE ONLY ONES WITH OVER 100 T-BLACK TIPS FOR SPECIFIC PROCEDURES The continuous commitment of Esacrom Research and Development Department today led us the realization of more BLACK Every tip is an example of the added value and effort that every day Esacrom perform to provide innovative solutions to surgical procedures problems.

COME SFIORARE LE ALI DI UNA FARFALLA AS TOUCHING BUTTERFLY WINGS FOREFRONT IN TIPS AND FINISHING BUTTERFLY EFFECT:

| T-BLACK DOPPIO RIVESTIMENTO NANO STRUTTURALE SULLA SUPERFICIE DOUBLE NANO STRUCTURAL FINISHING ON THE SURFACE FEATURES ADVANTAGES LESS ABRASION AND WEAR OUT LESS OXIDATION CYTOTOXICITY TESTS BETTER RESISTANCE TO CHEMICAL ATTACK BETTER BIOCOMPATIBILITY FINISHING BETTER EFFECTIVE CUT AND LOWER HEATING OF THE TISSUE “Comparison analysis on T-BLACK tips have found out a reduction on the overheating of the tissue and an increased resistance at wearing out and corrosion”. LOW FRICTION (AUTO LUB) BETTER CLEANING SLIDE SURFACE BETTER VISIBILITY IN THE OPERATING FIELD Dipartimento di Scienze Orali,...

LA NUOVA FRONTIERA DEGLI INSERTI PER LA CHIRURGIA AD ULTRASUONI THE CUTTING EDGE OF ULTRASONIC SURGERY TIPS We are the only ones with more than 100 T-BLACK tips 7

| T-COR LEVIGATURA DELLE SUPERFICI SENZA IL RILASCIO DI RESIDUI SURFACES’ SANDING NO RESIDUAL ARE RELEASED T-COR is a special treatment which performs for materials subtraction and not addiction. Sending surface advantages are really remarkable (no residual are released). The special surface micro-abrasive technique is further improved thanks to T-BLACK treatment, which makes it even more slippery.

I SOLI CON INSERTI SPECIALI PER L’ABRASIONE DELL’OSSO THE ONLY ONES WITH SPECIAL INSERTS FOR BONE ABRASION ES020XLT THE ONLY ONE ALLOWING 4 ACTIONS WITH ONE TIP: milling, abrading and drill ADVANTAGES HIGH EFFICIENCY OPERATING ACCURACY TIME REDUCTION

| NEW TECHNIQUES CURVA D’APPRENDIMENTO: ZERO ZERO LEARNING CURVE Brand new “USER FRIENDLY” SURGERY TECHNIQUES used for the differentiated implant site preparation SUS-SURGERY ULTRASONIC SITE Ellittica Elliptical

DESCRIZIONE OPERATIVA DELLE NUOVE TECNICHE NEW TECHNIQUES OPERATING DESCRIPTION ELLIPTICAL Wrist’s ellipse movement by placing the bone inlay alternating pressure and release on the handpiece facilitated advancement of the tip inthe bone Delicate compacting of cancellous bone Bone’s overheating reduction “Gondola” wrist movement, SWING Easy cortical incision Bone’s overheating reduction Reduction / Zeroing of learning curve Reduction / Zeroing of learning curve 11 Vertical movement Wrist’s rotational right / left movement in axis with the insert, alternating pressure and release on the

| SWEEP-TORSIONAL MODE 3D SISTEMA 3D TORSIONAL MODE 3D FOR A BETTER DRILLING AND BONE HEATING REDUCING 3D SYSTEM FEATURES Front / Rear Right / Left Variation from the point of action Up / Down Contemporary 2D osseo Better drilling, reduced bone heating THE MECHANICAL MOVEMENT IS RELAYED IN 3 DIRECTIONS

One more step in ultrasonic surgery

| INFO GUIDA ALLA LETTURA DELLA SCHEDA PUNTA TIP’S SHEET READING GUIDE . WARNING: THE OPERATOR HAS ALWAYS TO VERIFY DEPTH MEASUREMENTS WHICH CAN CHANGE FROM TIP TO TIP. First measurement reference for TP and PM First measurement reference for TP and PM La: lenght from the corner o PM: Laser Marking cue ball in mm Cue ball diameter in mm. Distance between two cue balls in mm. the last three/four digits of the tip code (XXXXT) “T” letter indicates the T-BLACK treatment. La: lenght from the corner Distance between two notches in mm. On the opposite side is indicated Lot of production AA year of...

THICKNESS: it indicates the thickness of cutting tips LO DIAMETER: it indicates the diameter in the spherical and conical shaped tips OPERATIVE LENGHT: lenght of the working area LENGHT FROM THE CORNER: it indicates the measure of the tip from the edge to the top of the tip DEPTH MARKINGS: laser marking of depth markings in mm from the top of the tip* LASER MARKING: cue ball laser marking in mm from the end of the tip* SUGGESTED POWER SUGGESTED VIBRA LABELLING TIPS PLANNING SUGGESTED WATER PUMP MAX POWER: Maximum power which can be used with the insert. At maximum power tip’s brekeage vrisks...

| PIEZOCLEAN By Dr. Giacomo Tarquini THE FIRST ULTRASONIC CAVITATION SYSTEM FOR IMPLANT DECONTAMINATION Conical three-holed silver tip (one upper hole and two on both sides) for "Piezoclean by Dr. Giacomo Tarquini" device, not sharpened to be used with ES004EP, medical silicon cap. SUGGESTED POWER PUMP NB: suggested at 100 for bone cooling SUGGESTED VIBRA MAX POWER: maximum power which can be used with the insert.

Trapezium shaped for remodelling and biopsy. SHARPENED. Flat scalpel frontly sharpened for osteotomies, bone remodelling. SHARPENED and SAW SHAPED.

Flat scalpel for osteotomies inthin crest and cut teeth apexesblocs harvesting. SHARPENED. mies for biopsy. SAW SHAPED. SUGGESTED POWER PUMP NB: suggested at 100 for bone cooling used for osteotomies and extraction of Round scalpel for remodelling and biopsy. SHARPENED. SUGGESTED VIBRA MAX POWER: maximum power which can be used with the insert.