Labculture Class II, Type A2 Biosafety Cabinet, Model IA2-4A_-E. Class II, Type A2 Biological Safety Cabinets The Most Certified Energy-Efficient, Safe, and Ergonomic Biosafety Cabinet in the World WORLD CLASS. WORLDWIDE.

RS 232 Serial Interface Port- mSend operational information to Building m Optional zero volt exhaust and alarm Sentinel Gold Microprocessor Controller ■ Displays all safety information on one screen m Centered and angled down for easy reach & viewing ■ Selectable Quickstart mode for fast operation Single Piece Wall Large radius for easy cleaning m Side-mounted electrical outlets and staggered service fixtures, for easy reach Single Piece Work Tray ■ Recessed to contain spillage m Curved grill to prevent blockage ■ Helps prevent grille blocking m Comfortable working posture Does not harbor contaminants...

Energy Efficient ECM Motor 70% Energy savings compared to AC motor Airflow Sensor Monitors real-time airflow for safety Stable airflow, given building voltage fluctuations & filter loading Alert the user if airflow is insufficient Night Setback mode to further reduce power consumption by 60% Input Voltage motor voltage fluctuation airflow fluctuation Esco ECM motor stable motor voltage stable airflow ULPA Filter 10x Filtration efficiency of HEPA filter Creates ISO Class 3 work zone instead of industry-standard ISO Class 5 Esco cabinets use ULPA filters (per IEST-RP-CC001.3) instead of HEPA filters...

Cabinet Filtration System The Performance Envelope Concept Side capture zones Dynamic air barrier, inflow and forward-directed downflow air converge ULPA-filtered air Unfiltered / potentially contaminated air Room air / Inflow air Ambient air is pulled through front grille to create inflow, without going into the work surface. Inflow is joined by half of the downflow, to create front air curtain that is fine-tuned to create a large performance envelope. The combined air stream travels through the back air column towards the blower. Approximately 1/3 of the air in the common plenum is exhausted...

Model LA2 Biological Safety Cabinet Technical Specifications 1 (0.9 meter /3' model - one single outlet in workzone) (1.2, 1.5, 1.8 and 2.4 meter / 4',5',6' & 8' models 9. Fluorescent lamps two single outlets in workzone) 10. Plugged service fixture provisions 12. Stainless steel single-piece work tray (2 on each side) 13. Stainless steel armrest 1 1. Electrical outlet Retrofit Kit provision 14. Drain valve Retrofit Kit provision 8. Electrical / Electronics panel 2. Exhaust ULPA filter 3. Energy-efficient ECM Blower 4. Downflow ULPA filter, angled 5. UV light Retrofit Kit provision 6. IV bar...

GENERAL SPECIFICATIONS General Global : 230 V, 50 Hz Nominal Size External Dimensions * Gross Internal Dimensions Usable Work Area Tested Opening Working Opening Average Airflow Velocity Exhaust Airflow Volume Required Exhaust With Optional Thimble Exhaust Collar Static Pressure For Optional Thimble Exhaust Collar ULPA Filter Typical Efficiency >99.999% for particle size between 0.1 to 0.3 microns per IEST-RP-CC001.3 Sound Emission** Fluorescent Lamp Intensity Electrogalvanized steel with Isocide oven-baked epoxy-polyester powder coating, and Stainless Steel 304 (316 is optional) Cabinet Construction...

Purchase Specifications LA2 Series Class II, Type A2 Biological Safety Cabinet A. General Performance and Certifications maintain stable airflow, despite given building voltage fluctuation and increased filter loading. 15. The cabinet shall incorporate Night Setback mode to reduce the blower speed when the cabinet is not being used by the operator, while maintaining a degree of containment. 1. The biological safety cabinet shall comply with the following international standards, and the manufacturer shall provide a certified copy of containment and performance tests equivalent to or greater than...

ART Equipment Biological Safety Cabinets CO2 Incubators Compounding Pharmacy Equipment Containment / Pharma Products Ductless Fume Hoods Freeze Dryer Lab Animal Research Products Laboratory Fume Hoods Laboratory Ovens and Incubators Laminar Flow Clean Benches PCR Cabinets PCR Thermal Cyclers Powder Weighing Balance Enclosures Ultra-low Freezers The Esco Group of Companies is a global life sciences tools provider with sales in over 100 countries. The group is active in lab equipment, pharma equipment and medical devices. Manufacturing facilities are located in Asia and Europe. R&D is conducted...