CO2 Incubators CelCulture® CCL
20Pages

Cradle for Beautiful Cells

Welcome to Esco Esco’s Vision is to provide enabling technologies for scientific discoveries to make human lives healthier and safer. • A leader in the development of controlled environment, laboratory and pharmaceutical equipment solutions. • Group total of more than 600 employees. • A world leader in biological safety cabinets. • Products independently tested to international standards. • Large R&D investments, world leading technologies. Esco has established offices in 13 countries such as Bahrain, China, India, Japan, Korea, Malaysia, Philippines, Singapore, UK, US, Vietnam, South...

Global Network Global Offices Distributors Products and Application Esco Life Science Tools Medical Equipment Laboratory Equipment Biosafety and Laminar Flow Class II Type A2 Biological Safety Cabinets Class II Type B2 Biological Safety Cabinets Fume Hoods Laboratory Fume Hoods Ductless Fume Hoods Fume Scrubbers Class III Biological Safety Cabinets Exhaust Blowers Horizontal Laminar Flow Clean Benches Fume Hood Airflow Monitors Vertical Laminar Flow Clean Benches Laboratory Animal Research Workstations PCR Cabinets Incubators and Ovens Forced Convection Laboratory Ovens Forced Convection...

CO2 Incubators Introduction CO2 incubators are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, in vitro fertilization, neuroscience, cancer research and other mammalian cell research. Sleek, reliable and intuitive, Esco CelCulture CO2 incubators provide all-rounded sample protection that brings your scientific dreams one step closer to reality. Key Features CelCulture® CO2 Incubators ULPA Filter • 99.999% efficient, superior to conventional HEPA filters • Filters air continuously • Chamber returns to ISO Class...

• Long life • Stable output signal • No influence from CO2 Door Switch Automatically turns off the blower and gas supply when the door is opened Provides quick access to electrical panel components CO2 Sensor • Choice of TC or IR • Single-beam, dual-wavelength IR sensor is drift-free • Auto-zeroing Smartsense TM Microprocessor Interface Intuitive, fully equipped control and monitoring system Blower Gentle airflow in chamber improves recovery and uniformity Outer Door • Reversible • Heated to prevent condensation Sample Port Allows direct measurement of chamber atmosphere such as temperature...

VivoCell™ Precise Parameter Control Best Uniformity and Control Among Competition Time (minutes) Different lines represent different sensor positions inside the chamber. Esco CelCulture has uniformity variance of less than ± 0.2 oC which means all the samples are evenly heated.* Minimal fluctuation (± 0.1 oC) ensures temperature stability.* Fast CO2, Temperature and Humidity Recovery Without Overshoot 6 Precisely tuned sensor and software result in fast recovery of CO2 without overshoot. This ensures uniform CO2 levels even with frequent incubator door openings.*Similarly, temperature and...

CelSafe™ Robust Contamination Control SteriSafe™ ULPA Filtration System • Chamber air is continuously filtered by ULPA filters to keep the chamber at ISO Class 5 cleanliness, this ensures all contaminants from the room air and chamber air are filtered and only clean air is recirculated. • ULPA filters operate at 99.999% efficiency, superior to conventional HEPA filters which are 99.99% efficient. • Chamber achieves ISO Class 5 Cleanliness condition after a mere 13 minutes following a door closing.* Time (minutes) Validated SwiftCon™ Overnight Decontamination Cycle Heating up Staphylococcus...

CONTROLLER TYPE User - Friendly Software Interface 8 • Comprehensive, user-configurable alarms: Temperature CO2 Humidity (if installed) O2 (if installed) • CelAlert™ alarm system reminds user to replace parts. 1. Start / stop decontamination cycle 2. HEAT LED INJECT LED 9. Lights when heat is applied to chamber Lights when gas is injected 3. oC is lit when displaying the temperature 11. %CO2 is lit when displaying the CO2 concentration 5. Enter menu / go back to previous menu 12. Confirm value / enter a menu 6. Scroll up / increase value ULPA reminder will alert user to replace ULPA filter....

REAR PANEL Q Power Supply Inlet The power supply inlet connects the incubator unit to the power source The N2 gas supply inlet is only applicable for models with N2* Control function. Inlet The cooling fan prevents the electrical pane from overheating The RS485 provides serial communication port for PC. It can be daisy chained from product to © Analog Port (Optional) The analog port allows the incubator to output analog signals representing temperature, C02/02* concentration and relative humidity, depending on the options available in the ncubator. This allows the Incubator to be connected...

CelCulture CO2 Incubator Sensors IR Sensor An IR sensor is a versatile instrument for measuring CO2 level inside the incubator. The CARBOCAP® sensor is silicon based and its operation is based on the NDIR Single-Beam Dual-Wavelength principle. IR based sensors are not affected by water vapor, dust or most chemicals. The single-beam dualwavelength technology (one reference and one measurement) ensures a drift-free sensor that does not require calibration by the user. Operating principle When the sensor is operating, the FPI is regularly tuned back and forth between the two wavelengths. At...

Options and Accessories COA-1001 / COA-1001-F Humidity Display This option allows the Incubator to monitor the relative humidity inside the chamber. The probe for the sensor works in freezing conditions (-70°C) and also in temperatures up to +180°C. The sensor is easy to install and has excellent accuracy. The airflow in the chamber does not affect the measurement. The sensor is maintenance free. It does not need to be removed during 90°C moist heat decontamination cycle. COA-1002 / COA-1002-F CO2 Backup This option allows two tanks of CO2 to be connected to the incubator. It will...