Etac Cart II User manual (EN)

Etac Cart II / BM15501 / Rev B / www.etac.com English Manual Content Important This User Manual contains important safety instructions and information regarding the use of this product and accessories. Warning! This symbol indicates important information related to safety. Follow these instructions carefully. Read User Manual before use! It is important to fully understand the content of the user manual before attempting to use the equipment. Visit www.etac.com for download of documentation to ensure you have the latest version. General CE declaration The product, and its related accessories,...

Etac Cart II / BM15501 / Rev B / www.etac.com Etac Cart II (Nomad version) Cart components: Push handle Battery charger mounting plate Product label Upper basket Lower basket Etac Cart II (Nomad version) Etac Cart II (Nomad version) is an accessory for the transportable Molift Nomad ceiling hoist. The Cart is intended for storing, transportation and charging (optional) of the Molift Nomad ceiling hoist. The cart is made of steel, has 4 castors, 2 baskets for storing of Nomad ceiling hoist and slings. It also has an holder for Nomad Extension arm (accessory). It is ideal for hospital and institutional...

Etac Cart II / BM15501 / Rev B / www.etac.com Etac Cart II (HoverTech version) Cart components: Push handle Product label Upper basket Pump tube cup Lower basket Etac Cart II (HoverTech version) Etac Cart II (HoverTech version) is an accessory for the transportable HoverTech pump. The Cart is intended for storing and transportation. The cart is made of steel, has 4 castors, 2 baskets for storing of HoverTech pump and accesories. It is ideal for hospital and institutional care settings but can also be used in privates homes. 4

Etac Cart II / BM15501 / Rev B / www.etac.com Technical Data Nomad version Dimensions (Width, Length, Height): Steel, Plastic HoverTech version Dimensions (Width, Length, Height): Steel, Plastic Upper basket: 10 kg (22 lbs) Lower basket: 25 kg (55 lbs) Turning diameter: Upper basket: 10 kg (22 lbs) Lower basket: 25 kg (55 lbs) Product identification CO572 2 Label update, Rev. Revised Date: Revised By: Released Date: Released By: ECP ID: Product label Warning labels and Symbols The Product labels barcode contain article number and EAN code Symbols used on the product, explained in more detail:...

Etac Cart II / BM15501 / Rev B / www.etac.com Assembly Assembly parts Cup and arm holder ( Nomad version) 9 Etac Cart II EN - User manual 1. Open up the tube clamp. Insert the cup holder/arm holder together with the clamp. Close the clamp around the tube. The cup/ arm holder will now conect to the clamp. 2. Use templates on page 7 for positioning of cup and arm holder. 160mm for arm holder and 85mm for cup holder. 3. Use the applied phillip screw driver and tighten the screws for the pipe clamp. Upper basket Toolflex cup Toolflex holder Toolflex tube mount (2x) M6x16 screw (2x) M6 nylock nut...

Etac Cart II / BM15501 / Rev B / www.etac.com Cup holder (HoverTech version) Measuring templates 1. Open up the tube clamp. Insert the cup holder together with the clamp. Close the clamp around the tube . The cup will now connect to the clamp. 2. Use template 30 mm on page 7 for positioning of cup holder. 3. Use the applied phillip screw driver and tighten the screws for the pipe clamp

Etac Cart II / BM15501 / Rev B / www.etac.com Checklist after assembly Do not start using cart before completing control according to checklist after assembly. Use this checklist to verify that the Nomad cart is properly assembled and can operate correctly and safely before use. Make sure basket is properly fastened Make sure cart feels steady and all 4 wheels rolls freely. The cart should move in a straight line and not steer away in any direction when pushed on an even floor. The cart is intended for indoor use only. Stand in front of the Nomad Cart and attach the upper basket first on the...

Etac Cart II / BM15501 / Rev B / www.etac.com How to use Etac Cart II Nomad version Connecting Nomad to rail with extension arm Connecting Nomad to rail with extension arm Connecting Nomad to rail with extension arm Nomad ceiling hoist fits in the upper basket. Lower basket can be used for storing slings. Place Nomad ceiling hoist in upper basket. Push down button on hand control to drive out lifting strap. Use extension arm (accessory) to connect lifting strap to trolley in rail.

Etac Cart II / BM15501 / Rev B / www.etac.com HoverTech version Stand behind and push the cart with push handle. Do not lean over or put your own weight on the cart. Pull the cart over thresholds or other obstacles. Do not push cart on deep pile carpets, over high thresholds or other obstacles. HoverTech pump fits in the upper basket. Innsert the end of the tube into the cup holder.

Etac Cart II / BM15501 / Rev B / www.etac.com Accessories Recommended optional equipment and accessories for Etac Cart II. Battery charger Nomad ceiling hoist is charged through the hand control. The hand control charger can be mounted on the Nomad Cart. Use the screws and nuts supplied with the Nomad Cart and mount on the battery charger mounting plate. Charger for handcontrol Molift Nomad/AIR. Art. no.: 1240100 Extension arm Molift Extension Arm is made for safe and easy mounting of Molift Nomad to the trolley in a rail system. The Nomad Cart has a holder for the extension arm. The extension...

Etac Cart II / BM15501 / Rev B / www.etac.com Maintenance Cleaning and disinfection Spare Parts Clean on a regular basis. Clean surfaces with a damp cloth using an appropriate pH-neutral detergent. Do not use solvents or strong liquids, this may damage surfaces on the lifter. For disinfection when needed; use isopropyl alcohol. Avoid abrasive cleaning products. Remove hair and pile from the castors and verify that the castors rotates freely. Extension arm holder parts Toolflex holder (top) Art. no.: 1220200 Toolflex tube mount (part around tube) Art. no.: 1220201 Toolflex cup (bottom) Art. no.:...