E50/E55 Walk-behind scrubber-dryer
1 / 2Pages

Catalog excerpts

E50/E55 Walk-behind scrubber-dryer - 1

ENJOY SUPERIOR QUALITY, EASE OF USE, AND UNMATCHED CLEANING PERFORMANCE WITH THE AFFORDABLE EUREKA WALK-BEHIND SCRUBBER-DRYERS. E50 & E55 are professional walk-behind scrubber-dryers, ideal for the thorough cleaning of small to medium size areas. E50 & E55 have a cleaning width of either 50 cm or 55 cm which, combined with a 4.3 km/h speed, boasts an area coverage ranging from 2150 sq/m/h up to 2365 sq/m/h. Both models are available either driven by a 24V battery system or mains powered. Additionally, traction can be brush assisted or fully automatic (TRAC versions). High capacity tanks [solution: 40 L; recovery: 50 L) maximise productivity and scrub time, and the on-board charger makes battery re-charging fast, safe and simple E50 & E55 are specifically designed to be easy to use, and to enable businesses with limited budgets to acquire the efficiency and reliability of a Eureka cleaning machine at a price that can be justified and afforded. THE EUREKA “START & GO" EXPERIENCE SIMPLE, HASSLE-FREE, ELECTRONIC-FREE CONTROLS MEAN OPERATORS DO NOT NEED ANY SPECIFIC TRAINING, AND CAN FOCUS SOLELY ON THEIR CLEANING ENVIRONMENT. CHOOSE BETWEEN THE EXTREMELY MANOEUVRABLE "BRUSH-ASSIST” AND FULLY-AUTOMATIC (TRAC) DRIVE TYPE. E50 & E55 ARE EQUIPPED WITH THE INDUSTRY'S MOST SIMPLIFIED CONTROLS. JUST POWER THE MACHINE ON AND PULL THE DRIVE BAR. THE ERGONOMIC DESIGN MINIMIZES OPERATOR WEARINESS AND INCREASES PRODUCTIVITY, MAKING CLEANING WITH THE E50/E55 MORE COMFORTABLE. NO-HASSLE MAINTENANCE • Roto-molded, easily cleanable solution and recovery tanks, fully accessible for sanitization. • Easy access helps reduce bacteria and other contaminant that can grow in enclosed tanks. • The recovery tank is equipped with a unique drain valve to control the flow of dumped water, as well as with an efficient anti-drip device. • The water filter [optional on base versions) can be easily removed for rinsing purposes. The optional state-of-the-art EDS [Eureka Dosing System) enables the use of up to 50% less chemicals, saving money, improving productivity, and reducing environmental impact. The amount and type of solution can be adjusted immediately to any specific type of dirt and floor, thus reducing the excess waste usually involved with conventional machines. Additionally, the EDS system eliminates operator contact with chemicals, thus improving safety issues. Waterflow adjusting knob and dosing system pump connection. 1. Turn the key "ON” 2. Press the Brush/Suction buttons 3. Pull the drive bar & go! Built-in storage compartment on hood is a clever way to maximise the use of available space, and help operators to focus only on their cleaning environment Eureka's tilting feature makes transporting & storing these scrubbers simple and easy. The optional ESCS [Eureka Solution Control Stop-Valve) cuts off or activates the flow of solution upon brush command, thus further decreasing the excess use of water & chemicals. IMPORTANT NOTE: The ESCS is equipped as a standard accessory on TRAC versions. E50 & E55 are equipped with an efficient anti-foam devi to prevent any damage to the vacuum-motor. E50 AND E55 ARE ELECTRONIC FREE! HIGH PERFORMANCE • Choose to achieve a higher level of cleaning: with up to 44Kg of down pressure, and up to 180 rpm disk rotation [all supplied through either a 0.8 hp or a 1.0 hp/0.75 kW brush motor, the most powerful in its class ), Eureka delivers spotless floors fast, safely and efficiently. • Direct drive to the brush [no belts) means reduced maintenance and increased performance. The motor is protected by a twin safety thermo-fuse Varistor. E50 & E55 are equipped with an exclusive system which allows for a tool-free, fast checking/replacing of batteries. Additionally, the on-board charger makes battery re-charging fast, safe and simple. * The scrub deck includes an adjusting knob, to adjust the brush angle thus counterbalancing the sense of direction of the machine. * Additionally, the brush can be quickly connected/ disconnected, without need for tools. HIGH PERFORMANCE SQUEEGEE and LARGE WHEELS • Even around 180-degree turns, the E50/E55 equal-pressure, fast airspeed parabolic squeegee recovers all cleaning solution from the floor. • The squeegee is made of steel, rather than plastic, and it's therefore fully protected against accidental hits. It can be adjusted “tool-free” to reach the optimum water pick-up angle. • Blades are in Lynatex, reversible, and can be quickly removed or replaced without need of tools. • The most powerful vac motor in its class [0.64 hp) means water recovery [1250mm water lift) leaves cleaned spaces ready for pedestrian traffic immediately. • Large diameter wheels, non-marking & anti-skid, mean increased manoeuvrability and productivity on all type of floors.

Open the catalog to page 1
E50/E55 Walk-behind scrubber-dryer - 2

Brushes & Pads Batteries Hour meter EDS Eureka Dosing System ESCS Eureka Solution Control Stop-Valve SUITABLE CLEANING SURFACES ceramic tiles, marble, cement, linoleum, porcelain tiles, rubber floors, on any kind of dirt. The NEW ECO LINE of scrubber-dryers by Eureka Is made up of 11 models, available in 23 versions, and is ideal for the thorough cleaning and maintenance of small, medium and large size areas The scrubbers are available either push-type or ride-on, and upon request can be equipped with the new, exclusive ECO system (patented), which breaks water economy and detergent saving...

Open the catalog to page 2

All Eureka - Floor Cleaning Machines catalogs and technical brochures