JOKER 014 PTA BALLOON CATHETER

Product catalog summary

Overview: The JOKER™ 014 PTA Balloon Catheter is specifically designed for infrapopliteal interventions, offering a range of features that enhance its performance in treating lesions where stents are not viable. It allows for smooth lesion crossing and re-intervention.

Product Range: The catheter is available in balloon diameters of 2-4 mm and lengths of 40-150 mm, with shaft lengths of 120 cm and 150 cm.

Advanced Features: The catheter includes a hydrophilic shaft coating for easier lesion crossing, compatibility with a low 4F sheath introducer, and a semi-compliant PA balloon material for controlled dilatation. It features a coaxial shaft design and kinking-resistant material for crossover procedures.

Technical Specifications: The catheter has a distal shaft diameter of 3.1 F, medial and proximal diameters of 3.8 F, and supports a guide wire diameter of 0.014". The balloon material is Polyamid/Nylon, with 2-folding for 2.0 mm and 3-folding for 2.5-4.0 mm sizes. The nominal pressure is 6 atm, with rated burst pressures of 16 atm for 2.0-2.5 mm diameters and 14 atm for 3.0-4.0 mm diameters.

Ordering Information: The document provides detailed ordering information, including balloon size, rated burst pressure, recommended introducer sheath, and order numbers for both 120 cm and 150 cm catheter lengths.

Manufacturer: Eurocor Tech GmbH, a subsidiary of Opto Eurocor Healthcare Limited, part of the Opto Circuits Group, located in Bonn, Germany.

Catalog excerpts

SPECIFICALLY DESIGNED FOR INFRAPOPLITEAL INTERVENTIONS

Open the catalog to page 1

JOKER™ 014 – PTA BALLOON CATHETER SPECIFICALLY DESIGNED FOR INFRAPOPLITEAL INTERVENTIONS JOKER™ 014 – CONCEPT BENEFITS • Crosses lesions smoothly due to the low proﬁle • Treats lesions where stents are not a viable solution • Enables re-intervention Wide product range: • 2–4 mm balloon diameters • 40–150 mm balloon lengths • 120 cm and 150 cm shaft lengths Advanced balloon characteristics: • Hydrophilic shaft coating for easier lesion crossing • Low 4F sheath introducer compatibility for all sizes • Semi-compliant PA balloon material for controlled dilatation

Open the catalog to page 2

JOKER™ 014 – PTA BALLOON CATHETER SPECIFICALLY DESIGNED FOR INFRAPOPLITEAL INTERVENTIONS JOKER™ 014 – ADVANCED PRODUCT FEATURES • Over the wire (OTW) PTA balloon catheter for successful infrapopliteal interventions • Low balloon crossing proﬁle • Low tip entry proﬁle • Short deﬂation time • Wide spectrum of balloon catheters for treating long, diffuse lesions • Elaborated catheter technology with good crossability, trackability and pushability for treatment of diffuse lesions • Precise, controlled dilatation – Controlled compliance for accurate balloon vessel sizing – Flat shoulders Coaxial catheter...

Open the catalog to page 3

JOKER™ 014 – PTA BALLOON CATHETER SPECIFICALLY DESIGNED FOR INFRAPOPLITEAL INTERVENTIONS TECHNICAL DATA JOKER™ 014 – PTA BALLOON CATHETER Design Shaft diameter distal 3.1 F / medial 3.8 F / proximal 3.8 F Balloon diameter Balloon length Usable catheter length (tip to strain relief) Guide wire diameter Hydrophilic coating on distal shaft Balloon material Balloon folding Balloon characteristic Recommended introducer sheath Nominal pressure Rated burst pressure Packaging unit PRODUCT ORDERING INFORMATION Balloon size diameter × length (mm) Rated burst pressure (atm) Recommended introducer sheath...

Open the catalog to page 4

JOKER 014 PTA BALLOON CATHETER

JOKER 014 PTA BALLOON CATHETER

Catalog excerpts

All Eurocor catalogs and technical brochures

Archived catalogs