PRODUCT DESCRIPTION FFP2 safety-mask with 5 layers, ear loop and nose clip. Non-washable. Non-reusable (NR). The textile used from exterior to interior are: 1 NON-WOVEN POLYPROPYLENE (PP) 2 MELTBLOWN SS SPUN 99% FILTERING CAPACITY (EMF STANDARD) 3 HOT AIR COTTON 4 MELTBLOWN SS SPUN 99% FILTERING CAPACITY (EMF STANDARD) 5 NON-WOVEN POLYPROPYLENE (PP) Band is made of recycled polyamide. The nose clip is made of covered aluminum. Color Folded measures Weight PHYSICAL CHARACTERISTICS White 15.6 cm x 10.7 cm (excluding bands) 7.7 grams (+/- 5%) VERSION 0: TECHNICAL TEAM 20/08/2020

APPLICABLE REGULATION Subject to PPE EU regulation (EU) 2016/425 Following harmonized standard EN149:2001 + A1:2009; FFP2 NR Certificate Module B (EU TYPE-EXAMINATION) issued by GEPTESZT (NB 2233) CE MARKING The masks will have printed the following marking VERSION 0: TECHNICAL TEAM 20/08/2020

VERSION 0: TECHNICAL TEAM 20/08/2020

VERSION 0: TECHNICAL TEAM 20/08/2020

VERSION 0: TECHNICAL TEAM 20/08/2020

In boxes of 50 units. Each unit is packed in a single bag. See layout on ANNEX 1 50 PCS In boxes of 20 units. Each unit is packed in a single bag. See layout on ANNEX 1 20 PCS VERSION 0: TECHNICAL TEAM 20/08/2020

Each box of 50 or 20 units has a customized label with the basic information about the lot number and manufacturing date. The information system will register the information about raw material lot numbers, the team that manufactured the lot and information about the destination of the specific lot. Sample label for each box: Manufacturing date Important note: the label might change in its design, but will reflect the same information. VERSION 0: TECHNICAL TEAM 20/08/2020

USE CASES AND RISKS TO COVER This mask can protect against particles present in solid and liquid aerosols. Category III individual respiratory protection equipment. This category includes risks that can have serious health consequences, irreversible damage, or even death. This equipment offers respiratory protection in an environment where the atmosphere may be contaminated. The means of removing hazardous agents from the air is by filtration. The filtering meets the requirements of the standard for FFP2. See ANEXO "RISK ASSESSMENT EMF E" VERSION 0: TECHNICAL TEAM 20/08/2020

VERSION 0: TECHNICAL TEAM 20/08/2020

INSTRUCTION MANUAL 1. Open the mask carefully not to touch its inside, check that it is properly oriented with the oblique part facing outwards and the nasal clip on top. 2. Hold the mask against your chin ensuring that it is completely covered nose and mouth. Adjust the shape of the nasal clip with both hands so that the tissue around the nose is attached and there are no gaps between the skin and the mask. 3. Pull out the rubber bands and adjust them behind your ears. 4. Adjust the position of the mask by ensuring that there are no gaps left on the perimeter of the mask and that it can breathe...

APPROPRIATE SIZE Consider that this mask is targeted to an adult audience. In general it has been validated for this facial size: VERSION 0: TECHNICAL TEAM 20/08/2020

IMPORTANT WARNINGS - Always make sure that the product is: Suitable for application Adjusted correctly Used for as long as the user is exposed Replaced when needed - Not suitable for use in explosive atmospheres. - Proper selection, training, use and maintenance are essential for the product to help protect the user from certain contaminants in the air. - Failure to follow all instructions on the use of these respiratory protection products and/or not properly use the entire product during all exposure periods may adversely affect the user's health, cause a serious or life-threatening illness...

- Do not alter, modify, clean or repair this respirator. - Recommended storage conditions: relative humidity less than 80%, well ventilated interior, without gas or corrosive material, avoid high temperatures or exposure to light. - Maximum storage time 24 months. Before initial use, always check that the product is within the indicated shelf life. VERSION 0: TECHNICAL TEAM 20/08/2020

Used masks should be treated as hazardous waste in accordance with applicable national regulations. VERSION 0: TECHNICAL TEAM 20/08/2020