• Structure : upright type, realized in stainless steel 18/10 AISI 304 both in- and outside. The storage compartment is divided vertically into 2 storage compartments fully insulated and completely independent between them, in the right door, the refrigerator compartment, while at the left door, the second, independent refrigerator compartment. All the internal corners are rounded to make easy any cleaning operations and the internal bottom is tray type to contain spills • Insulation : high density (40 Kg/m3) foamed-in-place polyurethane, with a thickness of 75 mm. CFC-free • Feet : Nr 4 made in stainless steel 18/10 AISI 304, adjustable in height for levelling • Insulated door : Nr 2, hinged, side-by-side, all made with the same material and insulation as the rest of the structure (stainless steel 18/10 AISI 304 always both in- and outside). Both the doors are provided with a removable magnetic rubber gasket in order to grant a perfect hermetic closing. The handles are flush-fitting type so they do not increase the size of the refrigerator. Both the doors are also fitted with a spring loaded automatic closing device for openings inferior 90° and with a special door switches that stops the internal ventilation at the door opening (to limit the air cold loss) and light the internal lighting at every opening • Internal equipment : Nr 6, (3 for each door), storage open wire shelves realized sheet steel with a strong plastic coating (rust-proof material). The shelves are mounted on special anti-tilt stainless steel slides that allows the shelf extraction and they can be easily removed and adjusted in height without the use of any tool. The special internal racking-system allows a great flexibility of the internal fitting with the possibility of interchange and combine both shelves and drawers (drawers optionally available) • Shelf dimensions (W x D cm) : 53 x 55 • Shelf loading capability (Kg) : 35 (with uniformly stored material) • Internal lighting : Nr 2 bulbs, one for each door, both mounted in the bottom part of the control panel, with automatic activation at every door opening through a special switch • Control panel “xPRO” : Nr 2, one for each compartment, both located in the top part of the structure (above the door). Both the controllers are microprocessor operating, with capacitive touch-buttons and colour display. The controller supervises all the appliance functions through the EEN (EVERmed Easy Navigation) interface, with icons and written messages, allowing a very intuitive interactivity between the appliance and the user, for an easy setting of all appliance functionalities according to needs and the control of the workings status. The control panel is battery operating in order to grant the functioning of the display and alarms even in case of power failure. The main functions panel are : • High resolution 3,5” TFT colour display, LED backlit, showing the appliance working status (actual temperature, compressor functioning, defrosting, alarm running, etc.) and allowing the surfing through the various controller menu for setting and checking purposes • Digital temperature displaying and adjusting with an accuracy of 0,1 °C • Keyboard touch-buttons with automatic block safety protection, to avoid tampering from unauthorized persons • Dual-level safety access, with PIN code protections, on both ON/OFF switch and keyboard touch-buttons. Reprogrammable PIN codes for increased security from access to the unauthorized personnel • Back-up battery, with automatic recharging, granting till 48 hours autonomy for the control panel functioning in case of power failure. The charging status is continuously shown on the display for immediate checking • Visual and acoustic alarm signalling (with automatic resetting) for: - high and low temperature, with limits programmable from the user through a dedicated menu EVERmed Sri Via Galileo Galilei 2, 46020 Motteggiana (MN) - ITALY Tel.: +39 0376 550828 - Fax: +39 0376 550831 E-mail: [email protected] - Http: www.eve

door ajar, delayed of 2 minutes to allow the standard operations. Programmable alarm delay through a dedicated menu - power failure - battery discharged - condenser dirty - anti-freezing evaporator - sensors failure • Muting facilities for the acoustic alarms, with continuous warning indication on the display and automatic ring-back if the alarm situation persists. Programmable ring-back delay through a dedicated menu • Test facilities for both control panel functioning, battery charging status and alarm limits • Alarms log history for the latest 30 alarm conditions (not deletable), with the...

ACCESSORIES AVAILABLE Extra wire shelf Wire basket Plastic partitions for drawers Kit of castors Temperature chart recorder Extra stainless steel wire shelf Stainless steel drawer Front top for drawers Safety door lock with key Electronic temperature printer Data logger function with USB port Internal electrical socket Ballasted sensor for simulation of product temperature alarm Cable port with cover GSM/GPRS telephone dialer Different voltage Wooden crate packing * The declared performances are referred at +38°C ambient temperature, relative humidity of 70% and without any internal thermal mass...