Technical Specifications:
The DR XL 3rd Gen is a digital radiography system featuring an a-Si TFT detection method and a CsI scintillator. It has dimensions of 460 mm x 460 mm x 15 mm and weighs 4.0 kg in its wireless form. The pixel matrix is 3,072 x 3,072 with a pixel pitch of 139 µm, and the active area measures 42.7 cm x 42.7 cm. The system supports 16-bit A/D conversion and a minimum spatial resolution of 3.4 LP/mm. Image transfer time is approximately 5 seconds, and power consumption is 30 W. Synchronization is achieved via AED or external trigger, and the housing is made from a magnesium aluminum alloy. The device can withstand a local load of 100 kg at Ø 40 mm and a uniform load of 150 kg across the effective image area.

Environmental Conditions:
Operating conditions range from 5 °C to 35 °C with humidity between 30% and 80% (non-condensing) and atmospheric pressure from 700 hPa to 1,060 hPa. For transport and storage, the temperature range is -10 °C to 55 °C, humidity from 10% to 90% (non-condensing), and the same atmospheric pressure range.

Capture Console:
The system includes an X-HW More Acquisition Station and X-AQS Software, which controls the detector, image acquisition, and optimization, and integrates dose-area product data. Options include X-AQS Modality, DICOM Modality (Send/Store, Worklist), and X-AQS PACS. Optional radiological diagnostic and clinical review displays are available.

Regulatory Requirements:
The system complies with CE 2460 standards.