Technical Specifications:
The DR XL WiFi device utilizes indirect conversion with an a-Si TFT detection method and a CsI scintillator. It measures 460 mm x 460 mm x 15.1 mm and weighs 4.7 kg. The pixel matrix is 3,072 x 3,072 with a pixel pitch of 139 µm, covering an active area of 43 cm x 43 cm. It supports 16-bit A/D conversion and a minimum spatial resolution of 4.0 LP/mm. Image transfer time is approximately 7 seconds, with a maximum power consumption of 16 W. Synchronization is achieved via AED or external trigger, and the housing is made from a magnesium aluminum alloy. The device can withstand a local load of 100 kg at Ø 40 mm and a uniform load of 100 kg across the effective image area.

Environmental Conditions:
Operating conditions range from 5 °C to 40 °C with humidity between 20% and 85% (non-condensing) and atmospheric pressure from 700 hPa to 1,060 hPa. For transport and storage, the temperature range is -20 °C to 55 °C, humidity from 5% to 95% (non-condensing), and the same atmospheric pressure range.

Battery Specifications:
The device uses a Lithium Polymer battery with a charging time of 2 hours and a working time of 4 hours at 200 images. The battery life is a minimum of 1,000 charging cycles.

Capture Console:
The console includes the X-HW More Acquisition Station and X-AQS Software, which controls the detector, image acquisition, and optimization, and connects to a dose area product measurement device. Options include X-AQS Modality, DICOM Modality (Send/Store, Worklist), and X-AQS PACS.

Monitors:
Selectable monitors include the X-HW More MultiTouch Monitor 21", X-HW More Monitor Eizo EV2450, and X-HW Diagnosis Monitor Barco MDNC-2221HE-NIO.

Regulatory Compliance:
The device complies with CE 2460 standards.