Lighting Solutions MERCURY-XENON POWER SUPPLY with PFC Key Features Line Input: 100 - 240 VAC, ± 10%, 50 - 60 Hz, 6.5 Arms max. Environmental: 0° C to 40° C operating. Altitude: -1,000 ft. to 12,000 ft. (-305 m to 3658 m) MSL. Weight: 2.7 lbs. (1.2 Kg). Dimensions: 6.50” x 4.65” x 2.60” tall (165mm x 114mm x 66 mm tall). The CEP300AHX, CEP300BHX, and CEP300CHX power supplies are designed to run Mercury-Xenon arc lamps in a constantpower mode. All CEP models have PFC. The CEP300 power supply is designed to run Mercury-Xenon arc lamps in a constant-power mode. The output power is adjustable from 270 to 315 Watts with a built-in potentiometer. EMI line-filtering is built-in to the unit. The supply includes an isolated +12V output for powering external fans or electronics. The CEP300 power supply is designed to switch to constantcurrent mode by removing two easily accessible shorting jumpers. Active Power Factor Correction (PFC) to meet EMC limits for harmonic current emissions, and limitations of voltage fluctuations and flicker. Ignitor: 25 KV ignition spike. Positive-side ignition. Minimum repetition rate is 10 strikes/second at 90VAC. Ignition pulses will continue for ± 1 seconds. This feature may be disabled via jumper, in which case the ignition pulses will continue until the lamp ignites. Ignitor Life: > 100,000 strikes.

MERCURY-XENON POWER SUPPLY Output power: 270 - 315 Watts, constant power Output voltage compliance: 12.0 to 17.0 V operating, > 110 VDC during ignition. Output regulation: output power held to within ± 5% over all input, output, and environmental conditions. Output current: 17.0 to 22.0 Adc Output ripple: <5%* Efficiency: >70% at 300 W output, 120 VAC input Thermal protection: Ballast is disabled when heatsink temperature exceeds 90oC. Unit will automatically restart after cooling down. Isolated Auxiliary output (SELV rated): +12.5VDC ± 2%, 2.0 A max. Optically Isolated Status and Control Connector...