EXIAS e|1 Analyzer_EN

Product catalog summary

Overview: The EXIAS e|1 Analyzer is a high-quality electrolyte analyzer developed in Austria, designed for both point-of-care and laboratory environments. It features a maintenance-free operation with an all-in-one cartridge system and innovative thick-film sensor technology.

Key Features:

Measures Na+, K+, Cl-, Ca²+, pH, and Hct with high precision.
Shortest time to result on the market at 25 seconds.
Lowest sample volume requirement at 20 μL.
Fully programmable automated on-board quality control (oQC) for up to 60 measurements per level.
Versatile sample input with no need for adapters.
Compact design with dimensions of 20 x 31 x 28 cm.

Technical Specifications:

Repeatability within-run precision for various parameters with CV% ranging from 0.04 to 1.64.
Three cartridge sizes available: 150, 300, or 600 samples.
On-board stability of 28 to 42 days.
Automatic 2-point calibration with configurable intervals.
Storage capacity for 500,000 patient results and QC data for a minimum of 24 months.
Connectivity options include Ethernet, USB, and optional WiFi.

Operational Characteristics:

Throughput of approximately 104 samples per hour.
Wet-up time of 30 minutes for new cartridge installation.
Built-in 2" thermal printer for easy data output.

Environmental and Power Requirements:

Operating temperature range: +15°C to +32°C.
Humidity range: 15% to 90%.
Power requirements: 100-240V, 50/60Hz.

Additional Information: The analyzer is certified according to ISO 13485, ensuring it meets high-quality standards. It is designed to be user-friendly with an intuitive interface and full connectivity for data exchange with laboratory information systems (LIS).

Catalog excerpts

ELECTROLYTE ANALYZER

Open the catalog to page 1

THE EXIAS e|1 ANALYZER MAKES IT POSSIBLE Developed and produced in Austria, the e|1 Analyzer stands for quality and high standards. The system uses an all-in-one cartridge that enables a maintenance free operation. Technical excellence and an innovative thick-film sensor technology lead to exceptional operational performance. Robust and clever design with a compact footprint makes the e|1 Analyzer well suited for both the point-of-care and laboratory environment. „EXIAS meets the highest quality standards and is certified according to ISO 13485

Open the catalog to page 2

THE e|1 ANALYZER SETS NEW STANDARDS Na+, K+, ClCa²+, pH, Hct Maintenance free Shortest time to result on the market Versatile sample input Intuitive user interface Full connectivity Lowest sample volume on the market Data exchange with LIS Network connection via LAN (RJ45) Data export via USB flash drive oQC Fully programmable automated 3 level on-board QC for max. 60 measurements per level All-in-one cartridge Robust and clever design Compact footprint Dimensions 20 x 31 x 28 cm (W

Open the catalog to page 3

MEASURED PARAMETERS Parameter Sample Type B Whole blood S Serum P Plasma

Open the catalog to page 4

ALL-IN-ONE CARTRIDGE Due to the sophisticated all-in-one cartridge, the e|1 Analyzer is completely maintenance free. All sensors, all solutions and waste pouches, as well as all wear and tear parts are integrated into the e|1 Cartridge. The versatile sample input allows testing with sample tubes, capillaries and syringes without further adapters. Smart clot detection, automatic declotting and selfdiagnostic system checks ensure highest on-board stability. Combined with the on-board QC (oQC) option the e|1 Cartridge sets high standards for quality and accurate testing. Three cartridge sizes (150,...

Open the catalog to page 5

ACCESSORIES e|1 QC MATERIAL Beside the on-board QC option, EXIAS provides manual QC ampoules that improve operator’s quality procedures in the daily point-of-care and laboratory environment. To ensure reliable patient results, three levels of QC ampoules are available. All ampoules are equipped with barcodes for an easy data setup via scanner. “EXIAS ensures accurate and precise patient sample results” CAPILLARY TUBES The heparinized single-use capillary with a container volume of 50 μL is optimized for the small sample volume of the e|1 Analyzer. In order to guarantee maximum security for operators,...

Open the catalog to page 6

TECHNICAL SPECIFICATIONS OPERATIONAL CHARACTERISTICS Parameters Na+, K+, Cl-, Ca²+, pH, Hct Calculated parameters nCa2+, tHb(c) Min. sample volume 20 µL Sample type whole blood, serum, plasma Sample container sample tubes, syringes, capillaries (no adapter required) Time to result 25 s Throughput TYP 104 samples / hour Wet-up time 30 min (new cartridge installation) ALL-IN-ONE CARTRIDGE Number of samples On-board stability Integrated on-board QC (oQC) oQC measurements / Level Storage temperature Shelf life CALIBRATION DATA Calibration Duration Interval Touch Display Resolution Ethernet USB flash...

Open the catalog to page 7

Open the catalog to page 8