19” heavy duty server rack for data centers 1.3 19” rack for data centers and network applications 19” Server Rack 19” Network Rack EMC Solutions Miracel® EMC Rack Double-panelled Miracel® EMC Rack Single-panelled

Knürr Miracel Knürr Miracel Also available in RAL 7021 dark-grey Also available in RAL 7035 light-grey The Knürr system platform best-seller An additional asset for the innovation rack Installation dimensions in accordance with IEC 60297 and IEC 60917 - 23 U / 37 U / 41 U / 46 U e.g. 41 U with 2000 mm external height and 41 U with 2100 mm and mobile plinth - 66-module / 74-module / 82-module (1 module = 25 mm) - Width: 482.6 mm (19”), 535 mm (20-module) Static load rating - 5000 N for the stationary version - 3000 N with mobile plinth Convenient 180° door opening angle Air partitioning Available...

Heavy Duty Server Rack

New heavy duty rack Increased stability compared with the classic Miracel® for static loads of 1,500 kg and more. Use of newly designed more stable extrusions and new, heavier dutycorner piece. Aluminium construction Proven technology based on aluminium extrusions offers high flexibility and stability with low weight. The T-slot system in the frame guarantees freely selectable arrangement of accessories. Improved handling Mobility provided by castor brackets integrated into the frame. Cable management Guaranteed orderly and spacesaving cable management. Adjustment at installation site, cable...

Strong points Modular construction Simple mounting, including all non-standard components – variable and in the integrated 19” or 25 mm increments. 8 Front doors Trim extrusions Vertical extrusion (T-slot/mounting holes) Rear panel Proven system accessories from the wide-ranging standard Miracel® range can, of course, be used. Basic rack Side panel Patented server extrusions guarantee easy mounting of 19” servers of all manufacturers. Rack bottom cover unit Rack plinth, stationary Multifunctional brace Side panel Rack bottom cover Rack plinth, mobile

Technical data Material - Extruded aluminium - Corner piece, die-cast aluminium - Covers, sheet steel, zinc-plated - Sheet steel doors Static load rating - 15,000 N (stationary model) - 10,000 N (mobile model) Tests according to version - IP test in acc. with IEC 60529 - Earthing and protective conductor test in acc. with DIN EN 60950 Installation dimensions in acc. with IEC 60297-1 and IEC 60297-2 - Height: 42 HU / 46 HU (1 HU = 44,45 mm) - Width: 482.6 mm (19” construction) Further standards and tests on request. Rack suites To create a rack suite with “n” racks, you require: - n-1 racks without...

Basic, 19” Heavy Duty Server Rack Width 600 and 800, design door perforated at the front, stationary - Basic version, with perforated single door at the rear - Special 19” server extrusions for mounting all trade standard 19” servers - Components in acc. with IEC 60297 - Design door at the front with coloured offset perforation - Installation of chassis runners and 19” shelves possible - Cable entry via top cover and bottom cover - Cable entry on the top cover, can be completely removed at the rear, allowing top cover removal and replacement after cabling - Top cover prepared for upgrading with...

Standard, 19” Heavy Duty Server Rack Width 600 and 800, design door perforated at the front, mobile - Full version with perforated design front door - Special 19” server extrusions for mounting all trade standard 19” servers - Components in acc. with IEC 60297 - Double rear door with perforation - Mobile - Air partitioning, around the 19” level - Installation of chassis runners and 19” shelves possible - Cable entry via top cover and bottom cover - Cable entry on the top cover, can be completely removed at the rear, allowing top cover removal and replacement after cabling - Top cover prepared...

Miracel® 19” Server Racks

19” ServerRack Miracel® Strong points Miracel® ASP ASP/Server Rack Miracel® Server Rack Miracel® Accessories Vertical Trim Cable Tray Support Bracket Plinth Combi Lock Lock Set Extension Kit

Miracel® Strong points 1 New server extrusions guarantee easy mounting of 19” servers of all manufacturers. Different variants for cable management enable adjustment to the set-up conditions. Optional tilt restraint provides safety for service personnel. Different concepts and designs for airflow from front to rear. 83% perforation guarantees optimum airflow. Glass door example

Proven safety through airflow measurements in the thermal management lab Knürr products meet the requirements of most environmental influences: climatic, chemical and mechanical – IP requirements – Electro-magnetic compatibility – Corrosive resistance – Earthquake stability – Environmental tests Knürr Thermal Management Lab Measurements, calculations and tests – Internal dimensions: (3.0 x 3.0 x 3.0) m2 – Temperature range: -45 to +60 °C – Humidity range: 10% to 95 % TEC00279 Airflow and heat simulation

The best 19” technology products and modular, ergonomic and functional workstation systems optimally enhance one another. Everything from one source. Everything from Knürr! Knürr server racks as requested by the customer (Fujitsu Siemens Computers)

Miracel® 19” ASP Rack / 19” Server Rack Widths 600 mm and 800 mm, front door with perforation Colour Final digit of order number .1: - Visible surface of covers, RAL 7035 light-grey Final digit of order number .8: - Visible surface of covers, RAL 7021 dark-grey - Basic version without plinth; can also be ordered if required - With special 19” server extrusions for mounting trade standard servers - With perforated doors on the front and rear for optimal airflow Jumpering space Front, 85.5 mm Supply schedule 1 basic rack 4 19” server sheet steel mounting hole extrusions 2 perforated doors (perforation:...