Catalog excerpts
HELP YOUR COMPANY
Open the catalog to page 1ENVIRONMENT SAFETY CABINETS FOR PAINTS, SOLVENTS, PESTICIDES AND FERTILIZERS • With large ventilation vents and internal flame arrestor mesh • Bottom spill tray for routine cleaning • Perforated shelves to allow any liquids to drain • Electrical continuity and external hazard stickers in accordance with relevant standards ART. F AA 1620 01 30 SAFETY CABINET FOR PAINTS AND SOLVENTS METAL COLOURS ART. F AA 1612 01 02 SAFETY CABINET FOR PESTICIDES AND FERTILIZERS CYLINDER LOCK (KEY) SUPPLIED STANDARD WITH CYLINDER LOCK AND TWO KEYS SHELF CAPACITY CAPACITY LITRES ALL INDICATED LOAD CAPACITY...
Open the catalog to page 3COMPLIANT WITH ITALIAN OCCUPATIONAL HEALTH AND SAFETY LEGISLATIVE DECREE 81/2008 4 adjustable perforated shelves ART. F AC 2530 01 99 bottom collecting tray COMPLIANT WITH ITALIAN OCCUPATIONAL HEALTH AND SAFETY LEGISLATIVE DECREE 81/2008 2 adjustable perforated shelves ART. F AC 2530 01 99 bottom collecting tray IN COMPLIANCE WITH THE ITALIAN PRESIDENTIAL DECREE (DPR) 290/01 4 adjustable perforated shelves ART. F AC 2530 01 99 bottom collecting tray IN COMPLIANCE WITH THE ITALIAN PRESIDENTIAL DECREE (DPR) 290/01 2 adjustable perforated shelves ART. F AC 2530 01 99 bottom collecting tray...
Open the catalog to page 4ENVIRONMENT- FRIENDLY DRUM AND TANK SUPPORTS Ecological spill containment pallets compliant with current environmental protection legislation, such as that covering the safe management of situations at risk and the protection of the soil, ground and aquifers. To prevent accidental fluid spills in the event of leaks or failures, the removable grating on which the drums stand allows the contents to flow into the containment tank below. The bottom is shaped to allow handling using a forklift or pallet trolley. These spill containment pallets must be placed on flat, protected surfaces in the...
Open the catalog to page 5DRUM PALLET TROLLEY ART. With 2 fixed wheels and 2 swivel castors with 0 125 mm standard rubber brake With 2 fixed wheels and 2 swivel castors with 0 125 mm standard rubber brake With support 54 GALVANISED + RAL5012 With 2 fixed wheels and 2 swivel castors with 0 125 mm standard rubber brake CIRCULAR BASE FOR DRUMS ART. dim.mm
Open the catalog to page 6Drum capacity 1x200 litres not stackable, for tank F ML 0820 00 54 04 RAL 5012 Galvanised finish For tank F ML 0830 00 54, stackable, suitable for forklift handling and palletising
Open the catalog to page 7STEEL SPILL CONTAINMENT PALLET FOR TANK Spill containment pallet for 1000 litre containers. 100 mm above the ground, with forklift truck or pallet truck fork brackets. Plastic tank with metal grille, capacity 1000 litre TANK SUPPORT STAND WITHOUT GRILLE for: F AX 402085 0000 54, F AX 402085 0A00 54, F AX 402085 0ATA 54, F AX VDRHV0 0000 54
Open the catalog to page 8PRACTICAL AND SAFE OIL STORAGE CABINET
Open the catalog to page 9TECHNICAL SPECIFICATION Designed for recovering and storing oil cans, our oil storage cabinets, complete with hinged doors, are a practical solution to organise liquids products. The liquid collection tanks are designed to be watertight and resistant to corrosion in both the galvanised and the painted versions. Available in different configurations with telescopic extension shelves with 200 kg capacity or fixed, height adjustable shelves.
Open the catalog to page 11HINGED DOORS Hinged doors are made of sturdy, specially shaped steel sheet, with a footprint depth of 25 mm. The 3-point closure ensures high security against break-ins. Available with cylinder locks with two keys. OIL RECOVERY TANK The collection tank is made of galvanised sheet steel with a 10/10 thickness and is watertight; it is used to collect any dripping at the end of oil drawing or in case of can breaks. It runs on “L” shaped guides fixed to the uprights on the sides of the cabinet. EXTERNAL OIL TANK The external oil safety tank has a capacity of 77 litres and it is watertight. It...
Open the catalog to page 12MASTER FO H 1650 mm METAL COLOURS PLASTIC parts colour range (caps) Pair of zinc-plated brackets for cabinet floor fixing DARK GREY 2 “HILTI” stud anchors suitable for non-cracked concrete floors ≥ class C20/25 Recommended anchor strength: 2.9 KN Anchor diameter: Ø 6 mm KEY LOCK (KEY) The cylinder closure “C0” is supplied as standard in cabinets. “C1” or “C2” versions on request. See Master section page 31 THE CABINET WITH SAFETY TANK 77 LITRES ARE SUPPLIED WITH GROUND BRACKETS ( ANCHORS NOT INCLUDED) EXTENSIBLE SHELF CAPACITY CABINET CAPACITY LITRES ALL INDICATED LOAD CAPACITY VALUES ARE...
Open the catalog to page 13Extensible shelf Safety tank 40 litres External tank 77 litres Cabinet complete with: 2 telescopic retractable shelves 100%, 8 plastic cans capacity 25 litres, 1 retractable safety tank for oil capacity 40 litres - Total useful capacity of the cabinet: 120 litres - Capacity of safety tank for oil: 40 litres Cabinet complete with: 2 telescopic retractable shelves 100%, 8 plastic cans capacity 25 litres, 1 retractable safety tank for oil capacity 40 litres, 1 safety tank for oil capacity 77 litres 2 plugs for tank - Total useful capacity of the cabinet: 200 litres - Total capacity of safety...
Open the catalog to page 14Extensible shelf Extensible shelf Extensible shelf Safety tank 40 litres External tank 77 lrtres Cabinet complete with: 2 telescopic retractable shelves 100%, 4 plastic cans capacity 25 litres, 5 plastic cans capacity 10 litres, 1 height-adjustable shelf capacity 150 kg - depth 618 mm 1 retractable safety tank for oil capacity 40 litres - Total useful capacity of the cabinet: 120 litres - Capacity of safety tank for oil: 40 litres Cabinet complete with: 2 telescopic retractable shelves 100%, 4 plastic cans capacity 25 litres, 5 plastic cans capacity 10 litres, 1 height-adjustable shelf...
Open the catalog to page 15All FAMI catalogs and technical brochures
-
AddSolution
78 Pages
-
Shelving Systems SYSTEM ST
56 Pages
-
PERFOM AK / VISUAL BOX
8 Pages
-
SLICK
8 Pages
-
Containers METAL
30 Pages
-
Industrial trolleys
52 Pages
-
Chairs Vice Hooks
10 Pages
-
Workstations DYNAMIC
38 Pages
-
CNC tool storage COMBI / PERFOM
32 Pages
-
Porta herramientas NC MASTER
86 Pages
-
Partitioning material
12 Pages
-
A PLACE FOR EVERYTHING
6 Pages
-
Changing Room Lockers
30 Pages
-
Computer cabinet STANDARD
16 Pages
-
Cabinets MASTER 36EH – 2
56 Pages
-
Computer cabinet MASTER
10 Pages
-
Cabinets MASTER 27EH
116 Pages
-
Cabinets Series STANDARD
22 Pages
-
Cabinets Series FLEXA
38 Pages
-
Shelving Systems SR MASTER
66 Pages
-
Shelving Systems SYSTEM AR
22 Pages
-
STORAGE DOMINO
10 Pages
-
SYSTEM TR
16 Pages
-
Workbenches WORK MOBILE MASTER
18 Pages
-
Workbenches WORK STEEL
32 Pages
-
Workbenches WORK ESA
4 Pages
-
Workbenches WORK MOBILE FLEXA
10 Pages
-
Workbenches WORK ROL STANDARD
10 Pages
-
Tool holder walls WORK LOOK
30 Pages
-
Workbenches WORK SYSTEM
18 Pages
-
Workbenches WORK MASTER
36 Pages
-
Workbenches WORK STANDARD
14 Pages