Shelving Systems SYSTEM AR
22Pages

EXTENSIBLE SHELF RACKING SYSTEM FOR HEAVY GOODS, IDEAL DESIGN FOR PICKING STORED GOODS WITH AN OVERHEAD CRANE

TECHNICAL SPECIFICATIONS The F AR shelving system, thanks to its extensible shelves, is especially suitable for storing very heavy material (moulds, engines etc.), which can be handled in complete safety by using an overhead crane and a lift truck. The shelves can have plain or telescopic extension, and a capacity ranging between 800 and 1000 kg.

SHELVING SIDES Made of sectional steel, they have slots to a 50 mm pitch on both sides. The two uprights are connected to each other by two horizontal cross bars and a cross piece, forming a sturdy side wall. The sides are equipped with steel plates for floor fixing. SLIDING DOORS They are made of sheet steel specially shaped to improve solidity. Doors are used to protect the shelved goods from impacts and dust. Each pair of sliding doors covers two shelving span lengths and has a cylinder lock with two keys. SIDE AND REAR WALL PANELS The side and rear walls are fixed with screws to the...

SYSTEM F AR SINGLE OPENING DEVICE FOR EXTENSIBLE SHELVES For safety purposes, each extensible shelf must be opened individually. The device consists of a rod to be installed on the side wall (one for each span) with a hook to be applied to each extensible shelf. Opening only one shelf at a time avoids dangerous shifting of unsecured heavy loads, which might overturn the structure. EXTENSIBLE SHELF LOCKING HOOK plain shelf locking hook A hook located on the front of the side walls allows the shelf to be locked in the opening and closing phases. In the opening phase, locking the shelf allows...

FLOOR SUPPORT PLATE The support plate is designed to distribute the pressure applied on the floor by the side wall. A technical data sheet supplied by FAMI is useful to check the suitability of the floor intended for racking system installation. The support plate is provided with a hole for plate anchoring to the floor by means of standard anchor bolts. This operation is necessary to ensure shelf safety. recommended anchor strength anchor diameter concrete hole diameter minimum hole depth minimum installation depth max adjustable thickness max tightening torque min floor thickness for...

RACK DEPTH WORKING SPAN LENGTH EXTENSIBILITY SIDE WIDTH RACK HEIGHT TOP SHELF ADJUSTABLE PITCH EXTENSIBLE SHELVES MINIMUM HEIGHT FROM FLOOR MINIMUM DISTANCE BETWEEN SHELVES MINIMUM SPAN BETWEEN SHELVES PLATE FOR SIDE PANEL MINIMUM DISTANCE FROM UPPER SHELF FOOTPRINT UPRIGHT SHEET METAL THICKNESS

TELESCOPIC EXTENSION SHELVES RACK DEPTH WORKING SPAN LENGTH EXTENSIBILITY SIDE WIDTH RACK HEIGHT TOP SHELF ADJUSTABLE PITCH EXTENSIBLE SHELVES MINIMUM HEIGHT FROM FLOOR MINIMUM DISTANCE BETWEEN SHELVES MINIMUM SPAN BETWEEN SHELVES PLATE FOR SIDE PANEL MINIMUM DISTANCE FROM UPPER SHELF SLIDE HEIGHT SLIDE WIDTH FOOTPRINT UPRIGHT SHEET METAL THICKNESS

CROSS BRACING NORMAL EXTENSION SHELF LOCKING HOOK 6 FULL EXTENSION SHELF METAL COLOURS HORIZONTAL DISTANCE TIE BARS FOR FULL EXTENSION SHELVES HORIZONTAL DISTANCE TIE BARS FOR NORMAL EXTENSION SHELVES FULL EXTENSION SHELVES SEE PAGE 1407 NORMAL EXTENSION SHELVES SEE PAGE 1410 ALL INDICATED LOAD CAPACITY VALUES ARE NET AND REFER TO EVENLY DISTRIBUTED WEIGHTS

COMPONENTS UPRIGHTS Sides are supplied disassembled Fixing material consisting of 2 expansion plugs in M16x140 steel supplied as standard. HORIZONTAL DISTANCE TIE BARS FOR NORMAL EXTENSION SHELVES 3 F AR 1040 00 - - 1250 2 bars are required for each span HORIZONTAL DISTANCE TIE BARS FOR FULL EXTENSION SHELVES 4 F AR 1010 00 850 2 bars are required for each span

It is required to use one span with cross bracing every at least 2 span lengths LOCKING HOOK 7 The hook is supplied as standard equipment with the extensible shelf Single opening The “AR” series shelving unit must be fitted with the single opening device for extensible shelves. This device allows one shelf at a time to be pulled out and consists of a rod of the same height as the side wall and locking hooks, which must be screwed into the rod to match the extensible shelves. One rod for each span and one hook for each extensible shelf are required (the hook is supplied as standard with the...

COMPONENTS METAL COLOURS .01 .04 [4 FULL EXTENSION SHELVES WITH 3 EDGES SPAN WIDTH 850 mm CAPACITY 1000 kg All load capacity values are net and refer to evenly distributed weights

.04 [4 FULL EXTENSION SHELVES WITH 4 EDGES SPAN WIDTH 850 mm ART. \/ SPAN WIDTH 1050 mm ART. Working CAPACITY 1000 kg All load capacity values are net and refer to evenly distributed weights

COMPONENTS METAL COLOURS .01 [4 FULL EXTENSION SHELVES WITH 4 EDGES AND MULTIPLEX COVERING SPAN WIDTH 850 mm CAPACITY 1000 kg All load capacity values are net and refer to evenly distributed weights

METAL COLOURS 3 NORMAL EXTENSION SHELVES WITH 3 EDGES SPAN WIDTH 1250 mm ART. V/ NORMAL EXTENSION SHELVES WITH 4 EDGESSPAN WIDTH 1250 mmART. \/ F AR 6650 00 F AR 6660 00 F AR 6670 00 3 NORMAL EXTENSION SHELVES WITH 4 EDGES AND MULTIPLEX COVERINGSPAN WIDTH 1250 mmART. \/ F AR 6650 01 F AR 6660 01 F AR 6670 01 SPAN WIDTH CAPACITY 800 kg All load capacity values are net and refer to evenly distributed weights The extension shelves are supplied with a capacity sticker.

METAL COLOURS .01 .02 .04 REAR WALLS H shelf Rear wall with mm plates no. A back panel must be fitted to each 2 bays SIDE WALLS H shelf Back panel with mm plates no.

COMPONENTS PAIR OF SLIDING DOORS The sliding doors close 2 span bays and are supplied complete with cylinder lock and 2 keys ART. F AR 8999 00 99 Floor fixing kit consisting of 2 M16x140 mm steel expansion bolts for non-cracked concrete floors, class higher than or equal to: C20/25. ALL LOAD CAPACITY VALUES ARE NET AND REFER TO EVENLY DISTRIBUTED WEIGHTS