14GPT
1 / 2Pages

Catalog excerpts

Planetary Gearheads High Torque Series 14GPT Values at 22°C Number of gear stages Reduction ratio 1) (rounded) Continuous torque, max. Intermittent torque, max. Peak torque Continuous input speed, max. 2) Intermittent input speed, max. 2) Continuous output power, max. Intermittent output power, max. Efficiency, max. Input inertia with pinion, max. Torsional stiffness, typical Backlash, at no-load, typical Shaft load, max.: – radial (6,5 mm from mounting face) – axial Shaft press fit force, max. Shaft play: – radial (6,5 mm from mounting face) – axial Length without motor L2 Mass without motor and flange Operating temperature range Direction of rotation, drive to output Housing material Geartrain material Bearings on output shaft Nm Nm Nm min-¹ min-¹ W W % gmm² Nm/° ° N N N mm mm mm g °C -30 … +120 = stainless steel stainless steel ball bearings, preloaded The reduction ratios are rounded, the exact values are available on request or at www.faulhaber.com. Input speed of reduction ratios 11:1 and 54:1 are limited to 14‘000 min-¹ and 17‘000 min-¹ respectively in continuous and intermittent operation. These gearheads are available only with motors mounted. Note: The display shows the range of possible operation points of the drives at a given ambient temperature of 22°C. The diagram indicates the recommended output speed in relation to the available torque at the output shaft. 1 gear stage 2 gear stages 3 gear stages 4 gear stages Intermittent torque Recommended areas for continuous operation For notes on technical data and lifetime performance refer to “Technical Information”. Edition 2024 Oct. 21 © DR. FRITZ FAULHABER GMBH & CO. KG Specifications subject to change

Open the catalog to page 1

Dimensional drawing Orientation with respect to brushless DC-motor terminals ±5° * For more combinations see table. Example of combination. L1 ±0,6 * For orientation with brushed DC-motors, please contact your sales representative Options Example product designation: 14GPT 95:1 KS5KL1 Description Option Type KS1 Output shaft Round plain shaft, L3= 11,4 mm KS2 Output shaft Longer round plain shaft, L3= 20 mm KS3 Output shaft Shaft with double flat shape of 7,8 mm length on opposite sides, L3= 11,4 mm Ambient conditions Low temperature range of -55°C … +100°C KL1 Ambient conditions Vacuum...

Open the catalog to page 2

14GPT 1 / 2Pages

Catalog excerpts

All FAULHABER Drive Systems catalogs and technical brochures

14GPT
1 / 2Pages