2232 ... BX4 IMC RS/CO

Product catalog summary

Overview: This document provides technical specifications and operational guidelines for the Motion Control Systems V3.0, featuring a 4-Quadrant PWM with RS232 or CANopen interface. It is designed for applications requiring precise motion control with a power output of 10.5 W and a torque of 18 mNm.

Specifications:

Power Supply: The electronic and motor power supply ranges from 6 to 30 V DC, with nominal motor voltages of 12 V and 24 V.
Performance: The no-load speed is 6,300 to 6,700 min-1, with a peak torque of 36 mNm for up to 30 seconds. The torque constant is 17 to 32.4 mNm/A, and the PWM switching frequency is 80 kHz.
Efficiency: The electronic efficiency is 95%, with a standby current of 0.027 A at 24V.
Speed Range: Operates between 1 to 13,000 min-1 depending on voltage.
Mechanical Features: The system uses preloaded ball bearings, with maximum radial and axial shaft loads specified for different conditions.
Environmental Conditions: Operating temperature ranges from -40 to +100°C, with a stainless steel housing and a mass of 77 g.

Operational Modes and Interfaces:

Interfaces: RS232 and CANopen interfaces are available, configurable via Motion Manager 7.
Operating Modes: Supports PP, PV, PT, CSP, CSV, CST, and homing modes according to IEC standards, with position, speed, and torque control options.
Application Programs: Up to 8 application programs can be stored, including an autostart function.
Additional Functions: Includes a touch-probe input and the option to connect a second incremental encoder.

Connection and Configuration:

Connection Options: Various cable and connection options are available, including a common voltage supply for motor and electronics.
Product Combinations: Compatible with precision gearheads, lead screws, and integrated encoders.

Diagrams and Illustrations: The document includes a dimensional drawing and a performance diagram illustrating the recommended operation areas and speed-torque relationship at nominal voltage.

Notes: All specifications are subject to change without notice, and rated values are calculated at a nominal voltage and 22°C ambient temperature.

Catalog excerpts

flgfl Motion Control Systems V3.0, 4-Quadrant PWM with RS232 or CANopen interface Note: The display shows the range of possible operation points of the drives at a given ambient temperature of 22°C. The diagram indicates the recommended speed in relation to the available torque at the output shaft. It includes the assembly on a plastic- as well as on a metal flange (assembly method: IM B 5). The nominal voltage linear slope describes the maximal achievable operating points at nominal voltage. Any points of operation above this linear slope will require a supply voltage UMot> Un. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to “Technical Information". Specifications subject to change without notice.

Open the catalog to page 1

FAULHABER Dimensional drawing Option, cable and connection information Example product designation: 2232S024BX4 IMC CO 7431 Type Connector Description AWG 26 / PVC ribbon cable with connector MOLEX Microfit 3.0, 43025-0800, recommended mating connector 43020-0800 Common voltage supply for motor and electronics AnInI ±10V (without DigOut2) Connection Standard Option: 7431 Standard cable PVC ribbon cable 8 x AWG 26, 1,27 mm Note: For details on the connection assignment, see device manual IMC. Product combination Precision Gearheads / Lead Screws Drive Electronics Cables / Accessories To view our...

Open the catalog to page 2

2232 ... BX4 IMC RS/CO

2232 ... BX4 IMC RS/CO

Catalog excerpts

All FAULHABER Drive Systems catalogs and technical brochures