*mymedicalexpo

Catalogs
FAULHABER Drive Systems
2250 ... BX4 IMC RS/CO

2250 ... BX4 IMC RS/CO

Product catalog summary

Overview: This document provides technical specifications and operational guidelines for the Motion Control Systems V3.0, featuring a 4-Quadrant PWM with RS232 or CANopen interface. It is designed for applications requiring precise motion control with a power output of 15.1 W and a torque of 27 mNm.

Specifications:

Power Supply: The electronic and motor power supply ranges from 6 to 30 V DC, with nominal motor voltages of 12 V and 24 V.
Performance: The no-load speed is between 5,650 and 5,900 min-1, with a peak torque of 54 mNm for up to 70 seconds. The torque constant is 19 to 36.9 mNm/A, and the PWM switching frequency is 80 kHz.
Efficiency: The electronic efficiency is 95%, with a standby current of 0.027 A at 24V.
Mechanical Features: The system uses preloaded ball bearings, with maximum radial and axial shaft loads specified. The operating temperature range is -40 to +100°C, and the housing is made of stainless steel.

Operational Modes and Interfaces:

The system supports various operating modes including position, speed, and torque control, compatible with RS232 and CANopen interfaces.
Configuration is managed via Motion Manager 7, supporting up to 8 application programs with an autostart function.

Additional Features:

Includes a touch-probe input and the option to connect a second incremental encoder.
Recommended operation areas are detailed in relation to torque and speed, with specific notes on assembly methods and voltage requirements.

Connection and Accessories:

Details on cable and connection options are provided, including standard and optional configurations.
Product combinations with precision gearheads, lead screws, and encoders are available, with further information in the 'Accessories' chapter.

Notes: All specifications are subject to change without notice, and rated values are calculated at a nominal voltage and 22°C ambient temperature.

Catalog excerpts

flgfl Motion Control Systems V3.0, 4-Quadrant PWM with RS232 or CANopen interface Note: The display shows the range of possible operation points of the drives at a given ambient temperature of 22°C. The diagram indicates the recommended speed in relation to the available torque at the output shaft. It includes the assembly on a plastic- as well as on a metal flange (assembly method: IM B 5). The nominal voltage linear slope describes the maximal achievable operating points at nominal voltage. Any points of operation above this linear slope will require a supply voltage UMot> Un. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to “Technical Information". Specifications subject to change without notice.

Open the catalog to page 1

FAULHABER Dimensional drawin Orientation with respect to motor cable ±5° 6x M2 3 deep 0p,2| A 2250 ... BX4 IMC RS/CO Option, cable and connection information Example product designation: 2250S024BX4 IMC CO 7431 Type Connector Description AWG 26 / PVC ribbon cable with connector MOLEX Microfit 3.0, 43025-0800, recommended mating connector 43020-0800 Common voltage supply for motor and electronics AnInI ±10V (without DigOut2) Connection Standard Option: 7431 Standard cable PVC ribbon cable 8 x AWG 26, 1,27 mm Note: For details on the connection assignment, see device manual IMC. Product combination...

Open the catalog to page 2

2250 ... BX4 IMC RS/CO

2250 ... BX4 IMC RS/CO

Catalog excerpts

All FAULHABER Drive Systems catalogs and technical brochures