Atlante 2® Range Documentation

Cementless press-fit cup The ATLANTE 2 cup has been specially designed to provide a perfectly suitable interface for the bone elasticity module, but also allowing easy, precise and safe implementation of a ceramic insert. The pre-mounted ring around the ceramic is designed to provide maximum protection to the ceramic, in cases of extreme positions, whilst maintaining the range of motion and stability associated with largediameter heads. Depending on the user's preference, the ATLANTE 2 cup can be used with either a ceramic insert or a TRIANON® highly cross-linked polyethylene insert, in the same...

Metal-back The internal surface of the metal-back has been designed to provide perfect fixation of inserts. Ceramic inserts are fixed by wedging, using a micro-threaded 14° morse taper. PE inserts are fixed using 12 notches, mass-produced, which hold the slots in the polyethylene, to direct it in 30° steps. It also has a lip for increased stability. The cup has three holes for the use of flat-head titanium cancellous bone screws, if necessary, which are available in sizes 15 to 40mm (a screw rack is included in the instrumentation set). PE liner The polyethylene liners for the ATLANTE 2 cup are...

prosthetic compatibilities Hip’n go – straight stems, cemeted and cementless 130° and 122° ATLANTE 2 with PE TRIANON® insert Stainless steel, chrome-cobalt or BIOLOX® FORTE® alumina heads ESOP LIS and ESOP cementless morpho-adaptable stems hi WALK cementless revision rtem ATLANTE 2 with ringed ceramic insert TABLE OF COMPATIBILITIES AND SALES REFERENCES 46 257 534 FLAT-EDGED TRIANON PE INSERT PE TRIANON STANDARD INSERT CERAMIC INSERT (titanium ring + BIOLOX DELTA) 257 597 257 598 257 599 257 600 available only in flat-edged version * provided not sterilized in instrumentation set www.fhorthopedics.com...