*mymedicalexpo

MIS burs

Product catalog summary

Overview: This document provides detailed information on the instrumentation used for minimally invasive forefoot surgery, specifically targeting Hallux Valgus and other forefoot deformities. The focus is on reducing surgical invasiveness while achieving the same outcomes as traditional open surgery.

Specifications: The surgical approach involves using specific manual instruments, fluoroscopy, and a power system to perform procedures through 3 mm incisions. The instruments are designed for precision and efficiency, including rasps, burrs, retractors, and surgical knives.

Procedures: The document outlines various osteotomies and corrections for the 1st metatarsal (M1), metatarso-phalangeal (MTP) joint, and lesser toes. Techniques include distal osteotomy, lateral arthrolysis, and distal metatarsal mini-invasive osteotomies (DMMO).

Instrumentation: The set includes 7 essential instruments such as rasps for bone debris extraction, separators, retractors, and a range of burrs for specific surgical needs. The instruments are designed for ergonomic use and precise surgical outcomes.

Burrs: There are 12 specific burrs designed for various osteotomies and bone resections. They are single-use, sterile-packed, and color-coded for easy identification. The burrs support a rotation rate of 1500 to 8000 RPM, with a torque reducer recommended.

Recommendations: The document emphasizes the importance of using fluoroscopy for monitoring and the ergonomic design of instruments for effective surgical procedures. It also highlights the availability of a comprehensive surgical technique guide produced by GRECMIP and TALUS groups.

Contact Information: FH Orthopedics provides contact details for their offices in France, USA, and Poland for further inquiries and distribution.

Catalog excerpts

FOR MINIMALLY INVASIVE FOREFOOT

Open the catalog to page 1

INSTRUMENTATION FOR MINIMALLY INVASIVE FOREFOOT SURGERY A complete solution > Precise indications > Innovative techniques Beaver handle (ref. 254 327) + Beaver blade (ref. 248 435) The aim of the surgical approach to Hallux Valgus referred to as “minimally invasive” is the same as that of open-air surgery : 1st shaft M1 : > to reduce the prominence of the medial side of the 1st metatarsal head, > to perform osteotomy of the basis of M1, > to perform distal osteotomy of M1, - with translation or not, - with correction of excess DMAA(Distal Metatarsal Articular Angle), by realignment of the distal...

Open the catalog to page 2

OSTEOTOMIES 258 153 reverse WEDGE BURR 2.9 x 10 mm MIS II 256 016 WEDGE BURR 3.1x13mm MIS 258 154 WEDGE BURR 4.1 x 13 mm MIS II M1 basal osteotomy or P1 (Akin), with lowering preferentiel effect, correction around 10°. Metatarsal osteotomy with substantial level of correction (10 to 20°). To flatten and thin tiner bone ; to contour in certain cases. M1 osteotomy or P1 (Akin) with a large level of correction > 20° Primary metatarsal osteotomy of M1 or osteotomy of P1, neutral level of correction (< 10°) All surgical bone proceedures of the lesser toes (R2 to R3) : claws of toes, butt, clinodactyly,...

Open the catalog to page 3

All FH Orthopedics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list