FIDO CERT-F300 Series
3Pages

EU TYPE-EXAMINATION CERTIFICATE This is to certify that the Personal Protective Equipment type, in respect of the product detailed on this certificate, has been evaluated and deemed to be in compliance with Regulation (EU) 2016/425 Module B, and the applicable Essential Health & Safety Requirements. Manufacturer: Fido Masks Co., Ltd. No. 8-5, She-Ling Li Yuan-Li Township Miao-Li County 35872 Taiwan Compliance with the applicable Essential Health & Safety Requirements has been demonstrated as above, including examination in accordance with the harmonised standard below: Product description: Respiratory Protective Devices - Filtering Half Masks .V=>6° Date of initial certification: 18th December 2018 Date of current issue: 18th December 2018 Date of expiry: 18th December 2023 A-T>p. _ _ Tednnical Director »v fi ■—r -INSPEC International Ltd, 56 Leslie Hough Way, Salford, Manchester, M6 6AJ, England. Notified body number 0194 This certificate has been issued in accordance with our standard terms and conditions and subject to INSPEC Regulations and Conditions of Use. This certificate remains the property of INSPEC and mav be withdrawn if any of the conditions attached to its issue are not complied with by the certified company. _' Pa9e10f3

Product details Model identification: Variants: Technical file reference: TD-F315/F315V & TD-F325/F325V Test reports: Category: vv Category III product must also have a certificate demonstrating conformity with Module C2 or D of Council Regulation (EU) 2016/425. , Options: None Accessories or spares: " None INSPEC International Ltd, 56 Leslie Hough Way, Salford, Manchester, M6 6AJ, England. Notified Body Number 0194 This certificate has been issued in accordance with our standard terms and conditions and subject to INSPEC Regulations and Conditions of Use This certificate remains the...

Certificate amendment record Conditions attached to the issue of this certificate: 1. Marking and instructions have been assessed in the English language only. It is the Manufacturer’s/Authorised Representative’s responsibility to obtain and supply language versions acceptable to the country where the product is to be sold. 2. Any changes to the product, technical file or quality manual/quality plan shall be immediately notified to INSPEC. 3. The Manufacturer/Authorised Representative shall comply at all times with INSPEC's Regulations governing CE Product Certification. 4. Satisfactory...