8000 Series Technical Specification
1 / 8Pages

8000 Series Technical Specification and Images February 2013 We reserve the right to make changes without prior notice

FINNDENT Dental units designed to last. FD-8000B1 The 8000 B1 is a floor-mounted dental unit with a connected instrument arm and supply connections underneath the unit body. The instrument tubing is run through low-friction doorio whip arms. There may be one or two control panels on the side of the instrument bridge to control the instruments and the chair. The dental light is connected to the unit body with an additional light column. An optional monitor arm is available for this column. The following cuspidors are available for connection to the unit body: Cuspidor Compact with a glass...

Niittylänpolku 16 00620 Helsinki FINLAND tel. +358 20 743 5115 info@finndent.com www.finndent.com FD-8000P1 - The Ceiling Unit Mounting the instrument bridge to the ceiling allows this model to be installed in any office space. Control units (electronic plates, transformer etc.) for the dental unit are installed between the concrete ceiling and the suspended ceiling of the clinic room. An installation box of white painted sheet metal is also available. The instrument bridge offers the same functionality as with the 8000B1 model. The dental light and optional monitor arm are connected to an...

Niittylänpolku 16 00620 Helsinki FINLAND tel. +358 20 743 5115 info@finndent.com www.finndent.com Height of the treatment room and installation methods The following three images show possible installation configurations of the FD8000P1 unit in treatment rooms of different heights. Installation with a low hanging ceiling. Installation without a hanging ceiling.

Technical specification for the dental unit Protection class I Protection grade B Prot. against fluids I PX0 Operational Standard. The unit is not suitable for use in an environment Safety grade with a mixture of inflammable anaesthesia, oxygen or laughing gas and air. Mode of operation Intermittent operation. Duty cycle for the unit 60s/20s (use/not use) Operating conditions Temperature: 15 - 40°C Relative humidity: 35 - 75% Main fuse Unit (incl. Chair): F3 / 6.3AT Main fuse unit only: F4 / 2 AT Water connection 3 - 6 bar (Particle size < 10 Mm)