*mymedicalexpo

Catalogs
Fisher & Paykel Healthcare
F&P 850? System Specification Sheet

F&P 850? System Specification Sheet

Product catalog summary

Overview
The MR850 Heated Humidifier is designed to deliver optimally humidified gas to both adult and infant patients. It features a dual feedback system with advanced algorithms to maintain optimal humidity levels while minimizing the need for caregiver intervention. The device is compatible with the full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care Continuum™.

Key Features

Mode Control Selection: Offers invasive mode for therapies requiring gas at 37°C and noninvasive mode for comfortable humidity levels with face mask or headbox delivery.
Temperature Display: Provides an easy-to-read display in various ambient light conditions.
Setup Indicator: Visually indicates where troubleshooting is needed.
Mute Button: Temporarily silences audible alarms.
Connectors: Color-coded for easy operation, secure connection, and error detection.

Technology and Usability
The MR850 incorporates EnviroSmart™ technology to optimize humidity output and adjust to environmental changes, minimizing alarms. It features a simple user interface with a three-button control system and a clear display.

Technical Specifications

Supply Voltage: Available in 230V~, 100V~, 115V~, and 127V~ models.
Frequency: Operates at 50/60Hz.
Supply Current: Ranges from 1.0 A to 2.3 A depending on the model.
Flow Range: Up to 60LPM in invasive mode and up to 120LPM in noninvasive mode.
Dimensions: 140 x 173 x 135mm (without chamber).
Heater Plate Capacity: 150W at nominal mains voltage.
Heater Plate Thermal Cutout: 118 ± 6° C.
Heater Wire Supply: 22V~, 60W Max.
Weight: 2.8kg (without chamber).
Recommended Temperature: Ambient temperature range of 18-26° C.
Display Temperature Range: 10-70° C with an accuracy of ± 0.3 °C in the 25-45° C range.
Warm Up Time: Less than 30 minutes.

Catalog excerpts

MR850 HEATED HUMIDIFIER The MR850 heated humidifier is part of a complete system designed to deliver optimally humidified gas to adult and infant patients. This dual feedback system incorporates advanced algorithms designed to achieve optimal humidity levels, while minimizing caregiver attention required. The MR850 can be used for the full range of Fisher & Paykel Healthcare therapies across the F&P Respiratory Care ContinuumTM.

Open the catalog to page 1

Designed for use throughout the hospital environment wherever medical gas is being supplied to patients, the MR850 heated humidifier incorporates advanced technology that provides physiological levels of humidity at body temperature. This technology along with simple controls allow this humidifier to be used in a wide range of settings. F&P Respiratory Care Continuum™ The MR850 incorporates technology to optimize humidity output while adjusting to changes in the environment and minimizing alarms. The MR850 can be used with all patient groups and for all therapies along the Fisher & Paykel Healthcare...

Open the catalog to page 2

F&P 850? System Specification Sheet

F&P 850? System Specification Sheet

Catalog excerpts

All Fisher & Paykel Healthcare catalogs and technical brochures

Archived catalogs