FP 4 SSP DIGITAL

Product catalog summary

Device Overview
The FP 4 SSP Digital is a digital sequential system designed for the mechanical prevention of Deep Vein Thrombosis (DVT). It features a digital display that shows preset functions, operating pressure, treatment time, and remaining time. The device includes programmable alarms for pressure changes and allows manual function deactivation and compression phase timing selection.

Components and Accessories

Base Unit PROUB
Garments for single and multi-patient use, covering foot-calf and calf-thigh areas
Connection sets for single and double garments
Operating room extension set

Use and Indications
The system prevents venous stasis by simulating the distal-proximal thrust mechanism of walking through a sequential cycle. It uses a pump to generate a pressure wave distributed in two pneumodistension chambers under the foot and calf. The D.A.S.C. System ensures uniform pressure distribution, adapting to limb geometry without stagnation or reverse flow.

Therapeutic Actions

Prevents venous stasis and increases venous velocity and flow
Contains venous dilation and reactivates lymphatic flow
Stimulates local fibrinolytic activity
Contains the venous wall

Technical Features

Sequential pressotherapy with a distal-proximal pressure gradient
Portable system capable of treating one or two limbs simultaneously
Backlit digital display for pressure values and treatment times
Graph of pressures and programmable functions
High and low pressure alarms with automatic shutdown
Electronic adjustment of treatment time
Pressure range: 0 - 80 mmHg
Operating cycle: 2 minutes
D.A.S.C. system for uniform pressure distribution
Terminals available for lower limb therapy
Option to replace each internal pneumatic bag individually
Medical CE mark

Catalog excerpts

Digital sequential system for the mechanical prevention of Deep Vein Thrombosis (DVT). Digital display shows all preset functions and actual operating pressure, as well as treatment and remaining times. Manual function with operator deactivation. Possibility to select the compression phase timing. Programmable alarms (audible and automatic shutdown) for unscheduled pressure increases or decreases. It consists of a pump that generates a constant-flow pressure wave, with an operating cycle programmed for 120 seconds, of which 40 are compression (programmable) and 80 are decompression/rest. Programmable...

Open the catalog to page 2

• Sequential pressotherapy with distal-proximal pressure gradient. • Portable-professional system, equipped with two sequential outputs, capable of treating one or two limbs simultaneously. • Backlit digital display for viewing pressure values, programmed treatment time and remaining time, and preset alarm thresholds. • Graph of pressures and programmable functions. • High pressure alarms (audible and automatic shutdown). • Low pressure alarms (audible, for disconnection of the connection, etc.) • Electronic adjustment of treatment time, both automatic and manual. • Pressure range: 0 - 80 mm...

Open the catalog to page 3

FP 4 SSP DIGITAL

FP 4 SSP DIGITAL

Catalog excerpts

All Fisiopress catalogs and technical brochures