Air Handling Unit eQL Catalogue July 2012
106Pages

Air Handling Unit eQL Catalogue July 2012

Fläkt Woods Specifications are subject to alteration without notice

eQ Family Fläkt Woods offers a full range of Air Handling products covering a wide range of applications and requirements. eQL is a part of the eQ family and is a Air Handling Unit with high air flows. VEKA are available in 2 sizes. eQ Top and TopMaster are available in 2 sizes. eQ Prime are available in 8 sizes. eQL is a air handling unit with high air flows. eQ Compact Units are available in 14 sizes. eQ Modular Units Customer adapted, special requirements, increased flexibility e.g. Hygiene, ATEX, cooler solutions. eQ Modular Units are available in 21 sizes. eQ Compact Units The standard...

Fläkt Woods has extensive knowledge and vast experience. We have produced air handling units since 1937. The main components are designed and manufactured by Fläkt Woods specifically for our eQL air handling units. We control the quality and the performance. We ensure that the quality and performance are optimized to give best possible performance over the lifetime of the unit. Fläkt Woods The air handling units eQL and all components are designed, tested and produced by the Fläkt Woods to applicable standards including ISO 9001 (quality assurance), ISO 14001 and EMAS (environmental...

Air handling with technology in the centre The following data is checked: An advanced product selection program makes dimensioning and specifying easier then ever before. • Flow, pressure, power consumption • Sound power to ducts per octave band • Sound to the surroundings per octave band • Heating and cooling capacity • Efficiency of the heat recovery unit • Pressure drop on the water side The associated product selection program is an integrated part of the eQL air handling units. It quickly and easily selects the right unit size and type to meet the preferred specifications. The program...

Fans – the heart of the system belt drive which gives higher efficiency and a smaller service requirement. The larger bearings give a longer operating life than equivalent V-belt drives. Another advantage of the flat belt drive is that it does not give off any dust. The fan is the heart of the air handling system. As experts in fan design we know how to install fans in air handling units. The eQL units are equipped with fans manufactured by Fläkt Woods. We offer a wide range of fan models and accessories allowing you to choose the optimal solution for just your installation. The fans are...

Highly efficient heat recovery The most suitable alternative is dependent on the conditions in each individual project. Temperature efficiency is a good measurement to indicate the effectiveness of a heat recovery unit. The greater the efficiency, the more heat recovered. Nevertheless, you should not always aim for maximum efficiency. Regoterm® is the heat recovery unit that has the highest temperature efficiency, about 85 % and gives the greatest operating economy savings. It can also recover cold and moisture. A large, effective rotor area gives greater recovery. Laminar air flow gives a...

ControlMaster® – control when demands are high ControlMaster® is a complete integrated control system for Fläkt Woods units. The equipment is supplied installed for complete as well as block divided air handling units. Easy selection ControlMaster® is easy to select using the product selection program. The program automatically selects the control equipment for the unit you have chosen. Shunts are selected for the air heaters or air coolers chosen. Frequency inverters are selected together with the motors, drive systems and fans to give the lowest SFPv-figure. A simple yet effective...

A robust casing platform The double-walled housing elements of aluzinc sheet steel, painted galvanized steel or stainless steel plate mounted in a solid frame construction of closed steel profiles and die cast stable corner elements. When the air handling unit EQL was constructed we put great emphasis on adapting to new opportunities and demands, such as CEN standards and quality assurance in accordance with ISO 9001. Facilitating service and maintenance was also an important aspect of design. EQL is an air handling unit range that meets high technology, safety and environmental...

Design Casing – design and properties The eQL Air Handling Units – are modern air handling units. They are designed to meet every conceivable air handling performance requirement and conform to all the pertinent stand- ards in Europe. The units conform to the tightness classes set by CEN and are produced in certificated production facilities both with reference to quality assurance (ISO9001) and workshop environment (ISO14001). – are based on vast experience. Fläkt Woods has been developing and producing air handling units for more than 50 years. All the main components: dampers, coils,...

Unit description Casing – design and properties Technical data Casing insulation Framework: The framework consists of box-section members made of 1,5 mm thick aluminium-zinc coated sheet steel (size 60-84 1,8 mm). Corners: rounded corner panels sandwich with two threaded holes in each leg. Frame profiles and corner are screwed together. Paneler: The panels are of double-skin construction, with 50 mm thick mineral wool insulation sandwiched between sheet steel panels. The density of the insulation is normally standard/m3, but insulation with a density of 55 kg/m3 is also available. The...

Unit description Casing – design and properties A unit that meets strict air handling demands The eQL air handling unit meets the requirements in Accordance with the classification in the CEN standard for air handling units. The components included in the unit are designed and tested in accordance with Swedish and international standards. The eQL air handling unit is produced in 8 sizes covering the air flow range from 8,0 m3/s to 30,2 m3/s. eQ is also available in 21 different sizes with air flow from 0,1 to 12,5 m3/s. Read more about eQ in a separate catalogue.The unit is normally...