Catalogs >
Flow-Meter >
EasySAFE® PLUS - safety jar

EasySAFE® PLUS - safety jar
2Pages

Catalog excerpts

The new EasySAFE® plus safety jar is a medical device designed and manufactured for applications of “high flow and high vacuum” joint in use with the EasyVAC® plus vacuum regulators and with EasyAIR® “Venturi system” suction units. This special safety jar is used to protect the equipment and the plant upstream, should the overflow valve in the main container not be working properly. The EasySAFE® plus safety jar is made of Polysulfone and fully autoclavable (134 °C 18 min.), having an overflow floating valve and a housing designed to fit an antibacterial filter to guarantee the complete suction system protection against any contamination. The collecting jar of this safety device has a deliberately reduced capacity (approx. 50 ml) so that even a small presence of fluid could immediately activate the floating valve to stop the suction. The inlet connection with a quick release snap ring, the rolling 360° position of the patient outlet hose connector and the quick locking system jar-to-lid by 1/12 turn only make simple and easy the connection and removing of the EasySAFE® plus safety jar to the EasyVAC® plus vacuum regulators and EasyAIR® “Venturi system” suction units. Everything is made to make simple, fast, safe and easy the use by the hospital staff. 02 01 QUICK RELEASE SNAP RING FOR EasyVAC® PLUS AND EasyAIR® VACUUM REGULATORS CONNECTION. PRESENCE OF SOFT GRIP INSERTS TO HELP THE HANDLING 02 360° ROLLING POSITIONING HOSE CONNECTOR Ø = 8.0÷9.2 MM 03 QUICK 1/12 TURN TO SPEED UP THE JAR CLEANING AND THE ANTIBACTERIAL FILTER REPLACEMENT (IF FILTER PRESENT) 04 HOUSING FOR PLACING AN ANTIBACTERIAL FILTER (OPTIONAL) EXCELLENCE IN INNOVATION BREAKTHROUGH TECHNOLOGY INTELLIGENT DESIGN REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.

Open the catalog to page 1

EasyVAC® PLUS AND EasyAIR® FITTED ON EasySAFE® PLUS (OPTIONAL) ■EasyVAC® PLUS VACUUM REGULATOR, PAGE 48 O EasyAIR® "VENTURI SYSTEM" SUCTION UNIT, PAGE 56 EasySAFE co by (Low-meter TECHNICAL SPECIFICATIONS | EasySAFE® PLUS SIZES (LxWxH) 93x76x74 mm flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 2