The EASYSAFE® safety jar is a medical device designed and manufactured for applications of “high flow and high vacuum”. Designed for use with the EASYVAC ® vacuum regulators, EASYSAFE ® is used to protect the equipment and plant upstream, should the overflow valve in the main container not be working properly. Made of a strong and reliable techno-polymer (polysulphone), the EASYSAFE ® safety jar is autoclavable (134 °C - 18 min.), has an overflow floating valve and a housing designed to fit an antibacterial filter to guarantee the complete suction system protection against contamination. This safety jar has a deliberately reduced capacity (approx. 50 ml) so that even a small presence of fluid can immediately activate the floating valve to stop the suction. The vacuum hose connector and the quick release connection nut make the EASYSAFE® simple and easy to set up and to remove from the EASYVAC® vacuum regulator. 01 QUICK RELEASE LOCK-UNLOCK NUT SYSTEM 02 HOUSING FOR ANTIBACTERIAL FILTER Ø 50 MM (OPTIONAL) REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I [email protected] I www.flowmeter.it VAT. N. IT0

EXAMPLE OF COMPACTNESS AND SIMPLICITY: EASYSAFE® SAFETY JAR WITH ANTIBACTERIAL FILTER FITTED ON EASYVAC® -1000 MBAR VACUUM REGULATOR. TECHNICAL SPECIFICATIONS | EASYSAFE® SIZES (LxWxH) SUCTION SOURCE CONNECTION quick release connection to EASYVAC® vacuum regulator PATIENT CONNECTION MAXIMUM APPLICABLE VACUUM VALUE MAXIMUM FLOW VALUE 60 L/min. ±10 L/min. at -950 mbar (without antibacterial filter) REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I [email protected] I www.flowmeter.it VAT. N. IT01737040160...