Catalogs >
Flow-Meter >
EN ISO 9170-2 AGSS Type 1

EN ISO 9170-2 AGSS Type 1
3Pages

Catalog excerpts

EN ISO 9170-2 AGSS TYPE 1 o m O s O z m g co > C/5 ^ O C 33 Z TERMINAL UNITSThe EN ISO 9170-2 AGSS type 1 terminal units for anesthetic gas scavenging systems are the points allowing operators in hospitals to connect the appropriate quick couplings to safely dispose the exceeding anesthetic gases and vapors away from the clinical environment. 05 The main purpose is to minimize the pollution of the premises where anesthetics are used. Two main installation principles are available: VENTURI TYPE | The suction system is based on the Venturi principle, on the basis of which an injector supplied with compressed air at a pressure of 4 bar, produces a constant suction (set by the installer) suitable for discharging anaesthetic gases outside the room where they are used. BLOWER TYPE | A blower generates a constant suction inside the centralized suction system designed to eliminate the anaesthetic gases from the room where they are used; the installer can also adjust the flow discharged directly on the base block by means of a variable section connector. FLUSH-MOUNTED INSTALLATION flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 1

EN ISO 9170-2 AGSS TYPE 1 TERMINAL UNITS EN ISO 9170-2 AGSS TYPE 1 TERMINAL UNITS | COMPONENTS Painted stainless steel cover panel, for flush-mounted case for EN ISO 9170-2 AGSS type 1 outlet with front access for the outlet simplified calibration. Flush-mounted case, complete with disposable panel, suitable for housing EN ISO 9170-2 AGSS type 1 sockets and outlet. EN ISO 9170-2 AGSS type 1 outlet. 01. VENTURI TYPE | Socket for EN ISO 9170-2 AGSS type 1 outlet with Venturi system. An injector supplies compressed air at 4 bars creating a constant suction (the setting value can be adjusted...

Open the catalog to page 2

FLUSH-MOUNTED INSTALLATION FOR EN ISO 9170-2 AGSS TYPE 1 OUTLET WITH VENTURI SYSTEM DIRECTORY - COMPONENTS DETAIL 01. EN ISO 9170-2 AGSS type 1 outlet 02. S/S cover panel with screws 03. Pneumatic gauge 04. Socket for EN ISO 9170-2 AGSS type 1 outlet with Venturi system 05. Flush-mounted case FLUSH-MOUNTED INSTALLATION FOR EN ISO 9170-2 AGSS TYPE 1 OUTLET FOR BLOWER DIRECTORY - COMPONENTS DETAIL 01. EN ISO 9170-2 AGSS type 1 outlet 02. S/S cover panel with screws 03. Socket for EN ISO 9170-2 AGSS type 1 outlet for blower 04. Flush-mounted case flow-meter" ENGINEERING REVOLUTION IN MEDICAL...

Open the catalog to page 3