Catalogs >
Flow-Meter >
FM series - medical gas pressure regulator/single-stage

FM series - medical gas pressure regulator/single-stage
2Pages

Catalog excerpts

FM series - medical gas pressure regulator/single-stage - 1

PRESSURE REGULATORS The single-stage FM pressure regulators are designed for direct fitting on medical gas cylinders in the different reference standards. They are equipped with single gauge to check the remaining contents of the cylinder or with double gauge to check and adjust the working conditions according to the user requirements. The FM type pressure regulators can be supplied with the calibration of the outlet pressure preset or adjustable through a knob. The body is manufactured of chrome-plated brass, with a precalibrated overpressure safety valve to protect against any malfunction of the system. A protective silicone cover prevents gauges damage caused by possible shocks received during transport or use. Appropriate inlet connections are available for all the most commonly used medical gases, according to the various standards used in different Countries. A special version, made for ambulances applications, fits a pressure gauge with electric signal 4-20 mA or 0.5-4.5 V output for the continuous monitoring of the supplied pressure and with system control panel interface. 01 01 OUTLET FOR FM PRESSURE REGULATOR (OPTIONAL) 02 ONE OF THE SEVERAL INLET CONNECTIONS FOR CYLINDER DIRECT FITTING TECHNICAL SPECIFICATIONS | Pressure regulator for ambulances GASES OPTIONS GAUGE ELECTRICAL FINAL OUTLET CONNECTOR hose connector with gas specific rotating nut FM PRESSURE REGULATOR WITH SPECIAL GAUGE FOR AMBULANCES REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 1

FM series - medical gas pressure regulator/single-stage - 2

PRESSURE REGULA1 WITH SINGLE GAU FOR I PRESSURE REGULATOR WITH SINGLE GAUGE PRESSURE REGULATOR WITH DOUBLE GAUGE TECHNICAL SPECIFICATIONS FM SINGLE GAUGE FM DOUBLE GAUGE OUTLET TUBING CONNECTOR 0 6.5 mm TERMINAL UNIT THREAD ISO G. 1/4" F. MAXIMUM INLET PRESSURE 200 bar (100 bar for N2O and CO2) INLET CONNECTIONS UNI 11144 • NF-E 29-650 • BS 341-3 • DIN 477- 1 TERMINAL UNIT TYPE (IF PRESENT) AFNOR NF-S 90-116 • UNI 9507 • BS 5682 • DIN 13260 • SS 875 24 30 GASES OPTIONS O2 • AIR • N2O • N2 • CO2 • Helium • Hydrogen flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY...

Open the catalog to page 2