In this section we propose our pressure regulators (FM series, MU and MERCURY®) and our Rs flowmeters for applications other than oxygen therapy (presented in the catalogue specific section). The supply of all medical gases through measurement devices requires accuracy and experience in manufacturing and development, so we underline once more that all these devices are made in full compliance with European standards and technical regulations, as well as requirements of 93/42/EEC Directive and the approval criteria set by national and international certified bodies. The CE marking procedure is carried out according to the requirements of a complete EN ISO 13485 quality system. All regulators and flowmeters are rigorously tested, both in flow-meter™ own quality-assurance laboratories and by independent validated laboratories, to ensure that the products meet all the requirements of the medical applications in any foreseeable therapeutic condition. PRESSURE REGULATORS FOR CYLINDERS, PRESSURE REGULATORS WITH INTEGRATED CYLINDER VALVE AND FLOWMETERS PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES

DOWNLOAD THE PRODUCT SHEET PRESSURE REGULATORS The single-stage FM pressure regulators are designed for direct fitting on medical gas cylinders in the different reference standards. They are equipped with single gauge to check the remaining contents of the cylinder or with double gauge to check and adjust the working conditions according to the user requirements. The FM type pressure regulators can be supplied with the calibration of the outlet pressure preset or adjustable through a knob. The body is manufactured of chrome-plated brass, with a precalibrated overpressure safety valve to protect...

PRESSURE REGULATOR WITH SINGLE GAUGE PRESSURE REGULATOR WITH DOUBLE GAUGE TECHNICAL SPECIFICATIONS FM SINGLE GAUGE FM DOUBLE GAUGE MAX. WEIGHT 1.14 Kg 1.40 Kg 1.11 Kg MAXIMUM INLET PRESSURE 200 bar (100 bar for N2O and CO2) INLET CONNECTIONS UNI 11144 • NF-E 29-650 • BS 341-3 • DIN 477- 1 TERMINAL UNIT TYPE (IF PRESENT) AFNOR NF-S 90-116 • UNI 9507 • BS 5682 • DIN 13260 • SS 875 24 30 GASES OPTIONS O2 • AIR • N2O • N2 • CO2 • Helium • Hydrogen OUTLET TUBING CONNECTOR 0 6.5 mm TERMINAL UNIT THREAD ISO G. 1/4" F.

DOWNLOAD THE PRODUCT SHEET PRESSURE REGULATORS The MU pressure regulators are designed for direct fitting on standard medical gas cylinders. They are manufactured with body of chrome-plated brass, with a pre-calibrated overpressure safety valve to protect against any malfunction of the system, with an inlet connection for O2 or Air according to the various standards used in different Countries and with an outlet hose connector. They are available in a version with preset calibration of the outlet pressure with single gauge to check the cylinder contents, or with adjustable pressure and a flow...

03 MU MU PRESSURE REGULATOR WITH SIDE FLOW GAUGE PRESSURE REGULATOR WITH FRONT FLOW GAUGE FRONT FLOW GAUGE 135x87x121 mm 0.72 Kg SIDE FLOW GAUGE 135x101x121 mm 0.71 Kg INLET CONNECTION UNI 11144 • EN 850 • NF-E 29-650 • BS 341-3 • DIN 477- 1 • ISO 5145

DOWNLOAD THE PRODUCT SHEET PRESSURE REGULATOR WITH AN INTEGRATED CYLINDER VALVE The MERCURY ® pressure regulators have a refilling valve appropriate to the required standards of the country of destination. An ergonomic knob allows the user to quickly open and close the cylinder flow, and gives a clear indication about the status of the system (ON-OFF). This device has a double stage preset output pressure, with a control gauge to indicate the pressure in the gas cylinder. The MERCURY ® pressure regulator has a chrome-plated brass structure and is equipped with a preset overpressure valve as a...

WORKING PRINCIPLE | The MERCURY® pressure regulators basically consist of: - a coupling with conical threading 25E or 17E for connection of the valves to the gas cylinder; - a gas recharging coupling of the residual pressure type, with a shutter (dimensions comply with the different reference standards of the country of destination); - a hose coupling for supply of the gas necessary for the therapy being performed; - a control gauge, to display the gas cylinder pressure value, with external metal protection against accidental blows; - a general open/close knob, with visual indication via a colored plate...

DOWNLOAD THE PRODUCT SHEET VARIABLE AREA FLOWMETERS The flowmeters type Rs are instant flow measuring devices suitable for the dosage of all medical gases. They can be produced in version with pressure compensated or not compensated and manufactured both with single or twin flow tubes in order to allow a double and independent gas supply using a single gas source. The flowmeters type Rs fit a needle valve with a knob in color code for the immediate identification of the supplied gas. The body is manufactured in chrome-plated brass with metal fittings and the measurement group is made of high...

Rs CHROME-PLATED BRASS BODY SINGLE CONSTRUCTION INLET CONNECTION ISO G 1/8” F. • ISO G 1/4” M. • 1/4”NPT M. • 3/8” ISO 3253 F. • M 12x1 F.