PRESSURE REGULATORS The MU pressure regulators are designed for direct fitting on standard medical gas cylinders. They are manufactured with body of chrome-plated brass, with a pre-calibrated overpressure safety valve to protect against any malfunction of the system, with an inlet connection for O2 or Air according to the various standards used in different Countries and with an outlet hose connector. They are available in a version with preset calibration of the outlet pressure with single gauge to check the cylinder contents, or with adjustable pressure and a flow gauge to check the flow of the supplied gas. A protective silicone cover prevents gauges damage caused by possible shocks received during transport or use. 02 01 CYLINDER GAS PRESSURE GAUGE 02 INLET CONNECTION ACCORDING TO INTERNATIONAL STANDARDS 03 FLOW ADJUSTING KNOB REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I [email protected] I www.flowmeter.it VAT. N. IT01737040160

03 MU MU PRESSURE REGULATOR WITH SIDE FLOW GAUGE PRESSURE REGULATOR WITH FRONT FLOW GAUGE FRONT FLOW GAUGE 135x87x121 mm 0.72 Kg SIDE FLOW GAUGE 135x101x121 mm 0.71 Kg INLET CONNECTION UNI 11144 • EN 850 • NF-E 29-650 • BS 341-3 • DIN 477- 1 • ISO 5145 flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I [email protected] I www.flowmeter.it VAT. N. IT01737040160