Gear Pump MG300 series
1 / 4Pages

• Medical and surgical equipment • Hemodialysis apparatus • Laser apparatus • Lubrication • Ink-Jet printing systems • Cooling systems • Laboratory instrumentation • Water treatment • Sampling • Food processing equipment • Sanitization The MG300 series magnet drive gear pumps are compact precision performance pumps for a wide range of specialized applications. Thanks to the improved design, the MG300 series grant a more accurate and uniform delivery regardless of the fluid temperature. The seal less design with the magnetic transmission of the rotation is guarantee of a leak proof product. Static seals are available in PTFE™ / NBR / VITON® / EPDM / SILICON, in order to guarantee the highest chemical compatibility with a wide range of fluids. The housing of the pump and the internal metal parts are in AISI 316 L stainless steel while gears and bushings are available in Peek™, Ceramic Peek™ or PTFE™. In operation the MG300 series pumps are noiseless, pulsation-free and capable of handling relatively high temperature liquids (up to 120 °C or 248 F) with low coefficient of expansion. Operation at different pressures ranges is possible thanks to a choice of materials for the magnets. Available upon request: • Rare earths driven magnet TECHNICAL INFORMATION * Priming ability varies with operating conditions and fluid characteristics

Operating range with ferrite driving magnet Operating range with rare earth driving magnet Torque Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron

Magnet drive gear pumps MG300 series Operating range with ferrite driving magnet Operating range with rare earth driving magnet Torque Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron www.fluidotech.com

MODEL NUMBER MATRIX Other materials available upon request Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy I: Tel. +39 02 9995 01 Fax +39 02 9995 0999 info@fluidotech.it Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) I ITel. +1 (860) 276 9270 Fax +1 (860) 620 0193 info@fluid-o-tech.com Fluid-o-Tech Int’l Inc. Japan 2nd Floor, 4-3-8, Espoir Todoroki, Todoroki, Setagaya, Tokyo 158-0082 :::::Tel. +81 (0) (3) 6432 1812 Fax +81...