Magnet drive gear pumps MK200/MK300/MK500 series The MK200, MK300 and the MK500 series pumps are designed to complete the existing MG series with improved performances in terms of capability to handle high viscosity fluids and a wider offer of materials to suit most applications, from the food to the industrial and chemical markets. The pump’s housing and the internal metal parts are available in AISI 303, AISI 316L or SAF 2205. The gears are available in Peek™, Ceramic Peek™ or PTFE™. The driving magnet and the quality of the materials of the assembled components allows handling of fluids with temperatures up to 120 °C (248 F). The low noise and pulsation is the result of precision gears accurately assembled and balanced within the housing combined with the magnetic coupling wich grants the perfect alignment. The Sanitary design makes this pump series the preferred candidate for use in medical applications where trouble-free products are needed. It is also available a special version designed for system pressure up to 35 bar (507 psi). MAIN APPLICATIONS • Medical and surgical equipment • Hemodialysis apparatus • Laser apparatus • Lubrication • Ink-Jet printing systems • Cooling systems Available upon request: • Built-in relief valve (MK200 series only) • Laboratory instrumentation • Water treatment • Sampling • Food processing equipment • Sanitization TECHNICAL INFORMATION Pump housing material Stainless steel Gears and bushing materials Peek™/Ceramic Peek™/PTFE™ Speed limit *Wet lift with water Peek™ -45 to 120 °C/-49 to 248 F Temperature range * Priming ability varies with operating conditions and fluid characteristics 66.4-80.83 [2.6141-3.1822] Pump fixing Pump centering Pump fixing

Operating range with ferrite magnet Operating range with rare earth magnet

Magnet drive gear pumps MK200/MK300/MK500 series Operating range with ferrite magnet Operating range with rare earth magnet Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron www.fluidotech.com

Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy I: Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Int’l Inc. Japan 2nd Floor, 4-3-8, Espoir Todoroki, Todoroki, Setagaya, Tokyo 158-0082 :::::Tel. +81 (0) (3) 6432 1812 Fax +81 (0) (3) 6432 1813 [email protected] Fluid-o-Tech Asia (Shanghai)...