The Fluid-o-Tech® FG series combines a 24V brushless DC drive motor in a rotor-less configuration with a high precision mag drive MG or PG series gear pump to deliver a high system capable of handling fluids in the most demanding applications. The service life of the unit, due to fewer moving parts and to the excellent balance of the system, is greatly extended compared to the traditional pump-motor units. The integration of the pump, motor and variable speed controller provides an electromagnetically coupled, leak free unit with a high degree of versatility. The extreme accuracy of the design and of the finishing allows the unit to deliver a smooth and pulsation free flow in all conditions. A range of materials is available for a wide array of fluids. • Medical equipment • Hemodialysis apparatus • Laser apparatus • Lubrication • Ink-Jet printing systems • Cooling systems • Laboratory instrumentation • Water treatment • Sampling • Food processing equipment • Sanitization TECHNICAL INFORMATION

Magnet drive gear pump-motor units FG200/FG300 series FG200-FG300 with 4 mm gears (0.3 ml/rev) FG200-FG300 with 13 mm gears (0.9 ml/rev) Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice....