Magnet drive gear pumps PG300 series There are applications where the liquids involved are very difficult to handle and working solutions are hard to find and require a great financial investment. The PG300 series is Fluid-o-Tech®'s reply to such requirements. Made to give the same high level of performance as the MG300 series, the PG300 series pumps are built in a special grade of PPS to offer the greatest versatility and quality of material while allowing for exceptional mechanical characteristics. The gears are available in Peek and PTFE. The elastomers are available in a comprehensive range of materials to allow usage in the widest variety of applications. The PG300 series offers mag drive coupling with ferrite or rare earths magnets. Available upon request: • Built-in relief valve • Rare earths driven magnet • Laboratory instrumentation • Water treatment • Sampling • Food processing equipment • Sanitization TECHNICAL INFORMATION * Priming ability varies with operating conditions and fluid characteristics Medical and surgical equipment • Hemodialysis apparatus • Laser apparatus • Lubrication • Ink-Jet printing systems • Cooling

Operating range with ferrite driving magnet Operating range with rare earth driving magnet Torque Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron

Magnet drive gear pumps PG300 series Operating range with ferrite driving magnet Operating range with rare earth driving magnet Torque Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron www.fluidotech.com

Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy I: Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) I ITel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Int’l Inc. Japan 2nd Floor, 4-3-8, Espoir Todoroki, Todoroki, Setagaya, Tokyo 158-0082 :::::Tel. +81 (0) (3) 6432 1812 Fax +81 (0) (3) 6432 1813 [email protected] Fluid-o-Tech Asia (Shanghai)...